Advertisement
Attention
When attaching the unit, make sure that the projector is stable. Perform the attachment in a safe place where
the projector will not be damaged even if you drop the air filter unit.
After replacing the air filter, reset the filter counter. Otherwise the power of the projector may be turned off for
safety.
After attaching the air filter unit, be sure to tighten the screws. If not, the air filter unit may drop off while
projecting.
Resetting the value of [Filter counter]
After replacing with the new filter, be sure to reset the counter.
1) On the menu screen, select [Setting] from the main menu.
2) Press the <SELECT> button.
The sub menu is displayed.
3) Press ▲▼ to select [Filter counter].
4) Press the <SELECT> button.
The sub menu 2 is displayed.
5) Press ▲▼ to select [Filter counter reset].
6) Press the <SELECT> button.
A screen for confirming whether to reset is displayed.
7) Select [Yes], and press the <SELECT> button.
The confirmation screen is displayed.
8) Select [Yes], and press the <SELECT> button.
Note
Reset only when replacing the filter.
When resetting, the display of [Filter warning] disappears.
-2
ENGLISH
Advertisement
