Startup Via Arp - Siemens Hicom 150 H Service Manual

lan2de.c03
Startup
Initial startup of HiPath HG 1500
Step
5. HiPath HG 1500 can now be administered remotely with Assistant Xpress
@LAN/HG 1500.
Note
The CHAP user ID and password are identical to the first user name and password
of the Hicom user group system administration (generally 31994/31994).

3.1.2 Startup via ARP

HiPath HG 1500 can be assigned an IP address using a static entry in the ARP table
of the Administration PC.
Prerequisites
The network card with the TCP/IP protocol must function correctly. The Xpress @LAN
assistant must be installed on the PC.
Step
1. In the MS-DOS command window,
enter the command arp -s ipadresse macadresse
(Format example: arp -s 192.168.100.245 08-00-06-0f-ec-04)
The board MAC address is indicated on the adhesive label on the board.
2. From the MS-DOS command window ping HiPath HG 1500 using the new
IP address. If the ping has been answered successfully by HiPath HG
1500, administration of this PC can proceed.
Note
These settings are temporary and are only stored permanently on the board on entry
to the customer database. The HiPath HG 1500 default IP address (10.144.233.63)
is reserved for startup and cannot be used as a permanent IP address in the network.
Security note
As long as a customer database has not been transferred to the board, the process
described above can be used by every PC in the LAN.
3-2
Task
Task
A31003-K5020-S100-6-7620
For internal use only
Service Manual