Troubleshooting; Specifications - Panasonic ER-CNT1 Operating Instructions Manual

Removing and mounting the blade
(Fig. 11)
► O uter blade
Remove
Rotate the outer blade in the direction of the arrow and
remove the blade. (1)
Mount
Insert the head's shaft (d) into the hole of the inner blade.
Rotate the outer blade to align its "
of the head. (2)
► I nner blade
Remove
Pull to remove the inner blade.
Mount
Insert the inner blade straight into the outer blade.

Troubleshooting

Problem
The cutting performance
has reduced.
There is an odd odour.
Blade does not move/
rotate smoothly.
The suction power is low.
If the problems still cannot be solved, contact your dealer or a
service centre authorized by Panasonic for repair.
"mark with the " " mark
Action
Replace the blade.
Clean the inner blade.
Clean the trimmings box.
Close the water inlet.

Specifications

Airborne Acoustical Noise
This product is intended for household use only.
62 (dB (A) re 1 pW)
9