Dell Premier PN7522W User Manual page 9

NOTE: You can use your PN7522W only with selected Dell laptops. For the list of supported devices, see www.dell.com.
NOTE: If your PN7522W is already listed under Bluetooth devices, remove it from the list before performing the following
steps.
Steps
1. Press and hold the top button for three seconds to enable pairing mode.
The Bluetooth-pairing light starts blinking blue to confirm the pairing mode is enabled.
2. In Windows Search, type Bluetooth.
3. From the list that appears, tap or click Bluetooth & other devices.
4. Ensure that the Bluetooth is enabled.
5. From the list of devices under Bluetooth & other devices, tap or click Dell PN7522W→ Pair.
NOTE: If your PN7522W is not listed, ensure that the pairing mode is enabled on the pen.
6. Confirm the pairing process on both pen and your device.
The Bluetooth-pairing light turns solid blue for few seconds to indicate the pairing is complete and then turns off. After
successful pairing, your device and pen connect automatically when Bluetooth is enabled and are within the Bluetooth range.
Setting up your PN7522W 9