Front I/O Bracket, Power Button Cable, And Card Reader - Lenovo ThinkStation P360 Tower Hardware Maintenance Manual

Note: To remove the screws, you need a special tool (T15 star wrench).
Removal steps

Front I/O bracket, power button cable, and card reader

Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, do the following:
1. Remove these parts in order, if any:
• "Computer cover" on page 53
• "Optical drive" on page 54
• "Front bezel" on page 55
• "Optical drive cage" on page 74
2. Disconnect the power button cable from the system board.
3. Disconnect the card reader cable from the card reader.
.
Chapter 7 Hardware removal and installation
93