Table of Contents
Advertisement
Installation
[3] Confirmation of network menu activity
When installing this product onto the projector, the network on-screen menu items
for this product are activated automatically. If not activated, the product may not have
been installed correctly. Please check chapter "Mounting" on page 12.
Turn on the projector and display the menu on the screen.
Confirmation of network setting menu [PJ-Net Organizer]
Using the pointers on the remote
control handset or on the projector,
select the PJ-Net Organizer icon
from the Setting sub menu, and
then press the SELECT button
once. Check if the setting is On. If
not, switch to On by using the
pointer
/
on this product will illuminate red.
Press the SELECT button again,
the network setting menu appears
on the screen as follows. For fur-
ther information about network set-
ting, please see chapter "Network
configuration"on next page.
Confirmation of password setting menu [Display]
Using the pointers on the remote
control handset or on the projector,
select the Display icon from the
Setting sub menu, and then press
the SELECT button twice. The
password setting menu appears on
the screen. If not, please check if
the function of PJ-Net Organizer is
On as explained on previous item
"Confirmation of network setting
menu". For further information
about password setting, please see
"Password setting menu" on page
17.
14
. The power indicator
Network Setting
IP Address
Subnet mask
Default Gateway
DNS
* The above on-screen display may differ from
the actual display depending on the functions
of the projector you use.
192 168
0
255 255 255
0
0
0
0
0
0
Password
0
0
0
2
0
0
0
0
Advertisement
Table of Contents
