Charging The Batteries - Siemens 300 Operating Instructions Manual

Batteries supplied are not charged.
Note:
New batteries should be initially charged for a minimum period of 16
hours without interruption – irrespective of any messages on the
display.
In order to maintain max. battery storage capacity for as long as
possible, the mobile unit should only ever be inserted in the charging
shell when the batteries are empty.
The batteries warm up during charging.
You can also use the charging shells or base stations of a Gigaset 900/
1000 for charging the mobile unit.
Only the following spare batteries are permitted:
Panasonic P-60 AA, Philips R6 NC-P, Saft RC6, UCAR RC6, DAIMON
ACCU 1000, Varta 751RS, Sanyo N-3UN and N-3UC.
Insert the mobile unit in the Gigaset 1000L charging shell to charge the
batteries. The mobile unit can be inserted with the display facing
upwards or downwards.
The left LED
are charging.
Charging times:
– Batteries in the mobile unit: 4 - 5 hours
– Replacement batteries in the reserve compartment of the
charging shell: 20 - 24 hours
Battery life:
These times are only achieved after several charging and discharging
cycles.
– 36 hours in stand-by mode
– 4 hours when phone is in use.
Putting into service
on the charging shell lights up while the batteries
16