Philips HD3133 User Manual

Always there to help you
Register your product and get support at
www.philips.com/welcome
HD3133
Question?
Contact
Philips
EN User manual
Specifications are subject to change without notice
© 2013 Koninklijke Philips Electronics N.V.
All rights reserved.
HD3133_UM_RU_V1.0_130419
English
1 Your multi-cooker
Congratulations on your purchase, and welcome to Philips!
product at www.Philips.com/welcome.
Before using the multi-cooker, you need to follow below preparations:
2 What's in the box (fig.1) 1 Measure the rice using the measuring cup provided.
2 Wash the rice thoroughly.
Multi-cooker main unit Steamer
3 Put the pre-washed rice in the inner pot.
Rice scoop Soup ladle
4 Add water to the level indicated on the scale inside the inner pot
Measuring cup Gloves
Warranty card Recipe
5 Press the release lever to open the lid.
6 Wipe the outside of the inner pot dry, then put the inner pot in
3 Overview (fig.2)
a Top lid f Power socket
7 Close the lid of the multi-cooker, and put the plug in the power
b g
Inner pot Heating element
c Lid release button h Water level indications
d i
Control panel Cooker handle
e Main body j Detachable steam vent cap
k Preset button p Boil/Steam button
l Keep-warm button q Bake button
m Rice button r Off button
n Soup/Congee/Stew button s Display
1 Follow the steps in "Preparations before cooking".
o Fry button
2 Press the rice cooking button (
Functions overview
3 Wait for a few seconds before the multi-cooker automatically
Functions Default Adjustable cook- Preset
cooking time ing time time
4
1 - 24
Rice ( ) 35 Minutes /
Hours 5 The multi-cooker will be in keep-warm mode automatically.
Congee/Soup/Stew 5 minutes to 10 1 - 24
10 Minutes
( ) hours Hours
Fry ( ) 15 Minutes 5 - 60 minutes /
Boil/Steam ( 1 - 24
30 Minutes 5 - 120 minutes
) Hours
1 - 24
Bake ( ) 45 Minutes 20 - 120 minutes
hours
4 Using the multi-cooker
1 Follow the steps in "Preparations before cooking".
2 Press the congee/soup/stew button (
1 Take out all the accessories from the inner pot. Remove the
packaging material of the inner pot.
3 To select a different cooking time, press the congee/soup/stew
2 Clean the parts of the multi-cooker thoroughly before using it for
4 After the cooking time is selected, the multi-cooker automatically
5
6 The multi-cooker will be in keep-warm mode automatically.
1 2
a
b
c
d
www.philips.com/welcome www.philips.com/welcome www.philips.com/welcome www.philips.com/welcome
HD3133 HD3133 HD3133 HD3133 e
User manual Safety leaflet Warranty Recipe
3
k
l
m
n
Note
Make sure all parts are completely dry before you start using the multi-
cooker.
that corresponds to the number of cups of rice used. Then smooth
the rice surface.
1 Put food and ingredients into the inner pot.
the multi-cooker. Check if the inner pot is in proper contact with
2 Follow step 6 in "Preparations before cooking".
the heating element.
3 Put the plug in the power socket.
socket. 4 Press the frying button (
»
5 To set a different cooking time, press the frying button (
Note
repeatedly to do so.
6 After the cooking time is selected, the multi-cooker automatically
Each cup of uncooked rice normally gives 2 bowls of cooked rice. 1 cup of
enters the selected cooking mode in a few seconds..
rice is approximately 180ml.
7 During cooking, stir the food constantly using a spatula.
The level marked inside the inner pot is just an indication. You can always
8
adjust the water level for different types of rice and your own preference.
selected cooking function light will be off.
Make sure that the outside of the inner pot is clean and dry, and that
there is no foreign residue on the heating element or the magnetic switch.
9 The multi-cooker will be in keep-warm mode automatically.
» The keep-warm (
).
»
enters rice cooking mode.
selected cooking function light will be off.
» The keep-warm (
) indicator lights up.
1 Measure a few cups of water with the measuring cup.
2 Pour the water into the inner pot.
Note
3 Put the steam basket into the inner pot.
4 Put the food into the steamer.
After the cooking has started, you can press the off button ( ) to
5 Follow step 7 in "Preparations before cooking".
deactivate the cooking process, and the multi-cooker will be in standby mode.
The default cooking time is 35 minutes, and is not adjustable.
6 Press the steaming button (
»
7 To set a different cooking time, press the steaming button (
8 After the cooking time is selected, the multi-cooker automatically
enters the selected cooking mode in a few seconds.
). 9
»
selected cooking function light will be off.
10 The multi-cooker will be in keep-warm mode automatically.
» The keep-warm (
button ( ) repeatedly to do so.
11 Open the lid and carefully take out the steamed food from the
enters the selected cooking mode in a few seconds. plate or steamer.
selected function light will be off.
» The keep-warm (
) indicator lights up.
4
j
i
h
g
f
s
r
q
p
o
Note
Do not exceed the volume indicated nor exceed the maximum water When removing the food from the steamer, use a kitchen glove or a cloth,
level indicated in the inner pot, as this may cause the multi-cooker to as the plate and steamer will be very hot.
Do not exceed the volume indicated nor exceed the maximum water level
too long. You can adjust the water level as needed.
If the voltage is unstable at the area you live, it is possible that the multi- After the cooking has started, you can press the off button (
deactivate the cooking process, and the multi-cooker will be in standby mode.
After the cooking has started, you can press the off button ( ) to In steaming mode, the cooking time only starts counting down when the
deactivate the cooking process, and the multi-cooker will be in standby mode. water starts boiling.
In congee, soup, and stew modes, the cooking time only starts counting The default cooking time is 30 minutes. You can select the cooking time
down when the water starts boiling. from 5 minutes to 2 hours.
The default cooking time is 10 minutes. You can select the cooking time
between 5 minutes to 10 hours.
1 Pour some water into the inner pot.
2 Follow step 7 in "Preparations before cooking".
3 Press the boiling button (
»
4 To set a different cooking time, press the boiling button (
).
5 After the cooking time is selected, the multi-cooker automatically
)
enters the selected cooking mode in a few seconds.
6
selected cooking function light will be off.
7 The multi-cooker will be in keep-warm mode automatically.
» The keep-warm (
) indicator lights up.
Do not exceed the volume indicated nor exceed the maximum water
level indicated in the inner pot, as this may cause the multi-cooker to
Note
After the cooking has started, you can press the off button (
deactivate the cooking process, and the multi-cooker will be in standby mode.
Do not close the top lid when cooking in the fry mode.
In boiling mode, the cooking time only starts counting down when the
After the cooking has started, you can press the off button ( ) to
water starts boiling.
deactivate the cooking process, and the multi-cooker will be in standby mode.
The default cooking time is 30 minutes. You can select the cooking time
The default cooking time is 15 minutes. You can select the cooking time
from 5 minutes to 2 hours.
between 5 to 60 minutes.
1 Put the food and ingredients in the inner pot.
2 Follow step 6 in "Preparations before cooking".
3 Put the plug in the power socket.
).
When baking cake, keep the lid closed during cooking.
When baking food other than cake, the lid must be opened during cooking.
) repeatedly to do so.
4 Press the baking button (
»
5 To set a different cooking time, press the baking button (
repeatedly to do so.
6 After the cooking time is selected, the multi-cooker automatically
) indicator lights up.
enters the selected cooking mode in a few seconds.
7
selected function light will be off.
8 The multi-cooker will be in keep-warm mode automatically.
» The keep-warm (
5
6
7
8
9
Note
10
) to
).
11
) repeatedly to do so.
) indicator lights up.
Note
) to
Note
When removing the inner pot from the multi-cooker, use a kitchen glove
or a cloth, as the inner pot will be very hot.
After the cooking has started, you can press the off button (
deactivate the cooking process, and the multi-cooker will be in standby mode.
The default cooking time is 45 minutes. You can select the cooking time
from 20 minutes to 2 hours.
Keep-warm mode
The multi-cooker provides you with easy control over the keep-warm
mode.
After you have selected the cooking function, the keep-warm
Note
(
To reactivate the keep-warm function, press the keep-warm button
(
multi-cooker will switch to keep-warm mode automatically after the
).
)
Note
In standby mode, you can press the keep-warm button (
enter keep-warm mode.
In keep-warm mode, you can press the keep-warm button (
to enter standby mode.
) indicator lights up.
) to
), the keep-warm indicator will be off. After the cooking
) to
)