Table of Contents
Advertisement
FEATURES / SPECIFICATIONS
FEATURES
Audio Amp
Including high power 4CH Amp.
Adjustment of BASS,TREBLE, FADER and BALANCE by the
audio adjustment button.
Sound preset function. (Sound adjustment state can preset
the 6 sorts.)
Auto loudness function varies a frequency characteristic by
volume.
The function that controls the amount of change in the low /
high frequency tone (BASS / TREBLE) adjustment with the
maximum volume.
ATC (Auto Tone Control) function that controls the low / high
frequency tone (BASS / TREBLE) by radio-field strength at
the receipt of AM.
Radio
FM and AM can preset the 6 stations.
Improvement in the tuning operationality by the Auto store
function.
TUNE button is a double function button operating of auto-
matic tuning and manual tuning.
CD Player
Power Loading / Power Eject function.
Skip recovered function.
(Recovered the condition before skip.)
Protected function of laser pick-up stopping at high tempera-
ture.
Quick track selection function.
Fast-forward / fast-rewind replay function.
Repeat function. (One tune)
Scan function : 10 sec
Available for loading both 8cm and 12cm disc.
Random play function.
Any time Eject function. (Eject at the all mode included ACC
OFF.)
CD-MP3 reproduction function.
(CD-DA/MP3 coexistence disc, TITLE/ID3tag display, MPEG-
1 AUDIO Layer3, MPEG-2 AUDIO Layer3)
Others
CD auto changer / in-dash CD changer operating function.
M-BUS is used the method of communication with CD auto
changer, in dash CD changer, MD player and LCD monitor.
The connection of speaker wiring can check by test mode of
the beep in the vehicle's assembly line.
Each mode is display on the connected LCD monitor (audio
display).
Control of panel buttons illumination and the connected
LCD illumination brightness by rheostat.
Telephone mute function.
Telephone voice interrupt function.
Stereo AUX input terminal equipnment.
Even during BATT OFF, the channel preset memory is re-
tained (usage of EEPROM).
The beep sounds, to check an operation, by using a button
with hold-pushing operation function (using the buzzer on the
vehicle side).
Theft prevention security function by PANEL OUT. (Blink
alarm-flash LED at ACC OFF.)
Put out lights of the lamp by PANEL OUT at ILL ON.
Downloaded from
ManualsNet.com
search engine
SPECIFICATIONS
FM Radio
Frequency Range
Intermediate Frequency
Sensitivity (-3dB Limiting)
AM Radio
Frequency Range
Intermediate Frequency
Sensitivity (20dB S/N)
CD Player
Laser
DA Convertor
Dynamic Range
Signal/Noise Ratio
Channel Separation
Others
Power Supply
Battery Back Up Current
Current Consumption
Maximum Power Output
Output Impedance
Dimensions
Weight
2
: 87.5 ~ 108.0MHz
(SEEK:50kHz / STEP:25kHz)
: 10.7MHz
: Less than 14dB(µV)
: 531 ~ 1629kHz
(SEEK:9kHz,1kHz / STEP:1kHz)
: 450kHz
: Less than 32dB(µV)
: Semiconductor Laser
: 16bit
: More than 65dB
: More than 65dB
: More than 40dB
: DC 12V (11~16V)
Test Voltage 13.2V
Negative ground
: Less than1.0mA
: ACC 2.4A ± 20%
(Output 1W)
: ACC 10A ± 20%
(MAX.Output)
: 25W x 4
: 4
: 178(W) x 169(D) x 50(H)mm
: 1.3kg
Advertisement
Table of Contents
