Getting Started; Using Your Monitor - Sony CPD-100SF Operating Instructions Manual

Getting Started

Before using this monitor, please make sure that the following
items are included in your package: Multiscan 100sf/200sf
monitor (1), power cord (1), Macintosh adapter (1), warranty
card (1) and this operating instruction manual (1).
This monitor will sync with any IBM or compatible system
equipped with VGA or greater graphics capability. Although
this monitor will sync to other platforms running at horizontal
frequencies between 30 and 70 kHz (Multiscan 100sf), 30 and
80kHz (Multiscan 200sf), including Macintosh and Power
Macintosh system, a cable adapter is required. Please consult
your dealer for advice on which adapter is suitable for your
needs.
Step 1:
With the computer switched off, attach the video
signal cable to the video output.
IBM or compatible
computer
to video output
HD15 - HD15 adapter
Apple computer
(not supplied) may be required
to video output
Macintosh adapter (supplied)
Notes :
Use a HD15 (Female) - HD15 (Male without the No.9 pin)
adapter (not supplied) for any current DOS computer which
is not compatible with DDC 2 AB and its No.9 pin is
disconnected.
Supplied Macintosh adapter is compatible with Macintosh
LC, Performa, Quadra and Power Macintosh series
computers. Macintosh II series and some older version of
PowerBook models may need an adapter with micro
switches.
Step 2: Attach the power cord to the monitor and the other
end to a power outlet.
Power cord (supplied)
to a power outlet
Step 3: Turn on the monitor and computer.
Step 4: If necessary, adjust the user controls according to
your personal preference.
The installation of your Multiscan 100sf/200sf is complete.
Enjoy your monitor.
1) VGA is a trademark of IBM Corporation.
2) VESA is a trademark of the non-profit organization, Video
Electronics Standard Association.
3) Macintosh is a trademark of Apple Computer Inc.
4) Windows ® is a registered trademark of Microsoft
Corporation in the United States and other countries.
4

Using Your Monitor

Preset and User Modes
The Multiscan 100sf/200sf has factory preset modes for the 7 most
popular industry standards for true "plug and play" capability.
For less common modes, the Multiscan 100sf/200sf 's Digital
Multiscan Technology will perform all of the complex adjustments
necessary to ensure a high quality picture for any timing between
30 and 70 kHz (Multiscan 100sf ), 30 and 80 kHz (Multiscan 200sf ).
CPD-100SF
No. Resolution Horizontal
(dots lines) Frequency Frequency Mode
1 640 480 31.5 kHz
2 800 600 46.9 kHz
3 800 600 53.7 kHz
4 832 624 49.7 kHz
5 1024 768 60.0 kHz
6 1024 768 68.7 kHz
7 1280 1024 64.0kHz
CPD-200SF
No. Resolution Horizontal
(dots lines) Frequency Frequency Mode
1 640 480 31.5 kHz
2 800 600 46.9 kHz
3 800 600 53.7 kHz
4 832 624 49.7 kHz
5 1024 768 60.0 kHz
6 1024 768 60.2 kHz
7 1024 768 68.7 kHz
8 1152 870 68.7 kHz
9 1280 1024 80.0 kHz
For the customers using the Windows
I
nstall the new model information of the Sony computer display
from "Windows95 Monitor Information Disk" into your PC. (To
install the file, refer to the attached "About the Windows95 Monitor
Information Disk/File").
This monitor complies with "VESA DDC," the standards of
Plug&Play. If your PC/graphic board complies with DDC, select
"Plug and Play Monitor (VESA DDC)" or this monitor's model
name (CPD-100SF or CPD-200SF) as "Monitor type" from "Control
Panel" on Windows95. Some PC/graphic boards do not comply
with DDC. Even if they comply with DDC, they may have some
problems on connecting this monitor. In this case, select this
monitor's model name (CPD-100SF or CPD-200SF) as "Monitor
type" on Windows95.
Recommended horizontal timing conditions
Horizontal sync width should be: >1.0 µsec.
Horizontal blanking width should be: >3.6 µsec. (Multiscan 100sf)/
Vertical sync width should be: < 560 µsec.
Note
CPD-100SF does not apply to Macintosh 21" color mode.
Vertical Graphics
1)
60 Hz VGA Graphic
75 Hz VESA 2)
2)
85 Hz VESA
75 Hz Macintosh
16" Color 3)
2)
75 Hz VESA
2)
85 Hz VESA
2)
60 Hz VESA
Vertical
Graphics
60 Hz
VGA Graphic 1)
75 Hz
VESA 2)
85 Hz VESA 2)
75 Hz
Macintosh
3)
16" Color
75 Hz 2)
VESA
75 Hz
Macintosh
19" Color 3)
85 Hz VESA 2)
Macintosh
75 Hz
3)
21" Color
VESA 2)
75 Hz
®4) 95
>3.0 µsec. (Multiscan 200sf)