Cisco 3110 Hardware Installation Manual page 16

Front Panel LEDs
3 Management Port Status
The 1/10-Gb fiber management port has a bicolor
LED under the SFP cage that indicates
link/activity/fault:
• Off—No SFP.
• Green—Link up.
• Green, flashing—Network activity.
• Amber—SFP present, but no link.
5 Fiber Port Link/Activity Status
Each fiber port has one dual color LED under the
SFP cage.
• Off—No SFP.
• Green—Link up.
• Green, flashing—Network activity at >1G
• Amber—No link or network failure.
7 CDO Status
• Green, flashing slowly (twice in 5
• Green and amber, flashing—Cloud
• Green—Cloud is disconnected.
Note
9 SSD 1 Status
• Off—The SSD is not present.
• Green—The SSD is present; no activity.
• Green, flashing—The SSD is active.
• Amber—The SSD has a problem or failure.
Cisco Secure Firewall 3110, 3120, 3130, and 3140 Hardware Installation Guide
12
is detected.
seconds)—Cloud is connected.
connection failure.
See the Easy Deployment Guide for
1000, 2100, or 3100 Series Cisco
Secure Firewalls for more information
on LTP.
4 Factory Reset Button Status
• Green, flashing—Flashes 5 seconds after
you depress the button.
• Off—Reset is complete.
6 Network Module 2 Port Status
• Green—Port is enabled, the link partner is
detected.
• Amber—Port is enabled, but the link partner
is not detected.
• Green, flashing—Port is enabled; network
activity is detected.
8 Alarm Status
• Off—No alarms.
• Amber—Environmental error.
• Green—Status is ok.
10 System Status
• Off—System has not booted up yet.
• Green, flashing quickly—System is booting
up.
• Green—Normal system function.
• Amber—System boot up has failed.
• Amber, flashing—Alarm condition, system
needs service or attention and may not boot
properly.
Overview