GE Truvitals TM3000 User Manual page 13

3. Hold the thermometer
still during reading. A
beep will indicate that the
measurement is complete
(unless you are in mute mode).
TM3000
Truvitals Non-Touch 2-in-1 Thermometer
2. Hold the thermometer 1-2 in.
(3-5 cm) from the object's
surface you wish to measure
and press the measure
button.
4. Once a temperature is
taken, the temperature will
remain on screen for five
(5) seconds before going
back to standby mode.
Simply press the measure
button again to take a new
temperature. Make sure to
hold the thermometer close
to the object you want to
measure because in surface
mode, the thermometer will
always pick up and read
a temperature.
11