Speaker Operation; Aux-In Operation - Silvercrest SMA 500 A1 Operating Instructions Manual

Speaker operation

♦ Completely unwind the speaker cable
cable storage (underside of device).
♦ Connect the 3.5 mm jackplug of the speaker cable
to your playback device.
♦ Switch the speaker on by moving the On/Off switch
to the ON position. The operating LED
4
nates in blue.
♦ Switch on your player and select the required volume
using the volume control
♦ To obtain a rich bass tone, move the BASS switch
to the ON position.
♦ To switch the speaker off again, move the On/Off
switch
goes out.

Aux-In operation

Many electronic entertainment devices are equipped with
a 3.5 mm jack socket. If your player has a connector that
diff ers from the audio output socket, use a suitable adapter if
necessary, or connect it to the AUX-IN
using an adapter cable. The relevant adapter/adapter
cable is available from specialist dealers.
SMA 500 A1
to the OFF position. The operating LED
4
8
.
5
connection socket
2
from the
8
3
illumi-
6
3
11
GB
IE