Connector Panel - Sony PFM-42B1 Operating Instructions Manual

Connector Panel

1
2
3
4
5
1 INPUT1 connectors
RGB/YUV (D-sub 15-pin): Connects to the RGB
signal or component (YUV) signal output of a
computer or a piece of video equipment.
This display also accepts an HD analog
component (Y/P /P
B R
assignment" on page 48 (GB) when inputting a
component signal.
AUDIO (Stereo minijack): Inputs an audio signal.
Connects to the audio output of a computer or a
piece of video equipment.
) signal. See "Pin
Location and Function of Parts and Controls
2 INPUT2 connectors
RGB/YUV (D-sub 15-pin): Connects to the RGB
signal or component (YUV) signal output of a
computer or a piece of video equipment.
This display also accepts an HD analog
component (Y/P /P
B R
assignment" on page 48 (GB) when inputting a
component signal.
AUDIO (Stereo minijack): Inputs an audio signal.
Connects to the audio output of a computer or a
piece of video equipment.
3 AUDIO OUT jack (Stereo minijack)
From among the audio signals input at the audio input
jacks, outputs the audio signal shown on the display
panel.
4 REMOTE (RS-232C) connector (D-sub 9-pin)
This connector allows remote control of the display
using the RS-232C protocol. For details, contact your
authorized Sony dealer.
5 VIDEO connectors
The PFM-42B1E/42B2E are not equipped with
VIDEO connectors. For the PFM-42B1E/42B2E,
composite video and Y/C input can be input to the
display when the BKM-B10 video input adaptor or
BKM-B13 video input & control S adaptor (not
supplied) is installed in the display.
COMPOSITE IN (BNC-type): Connects to the
composite video signal output of a piece of video
equipment.
COMPOSITE OUT (BNC-type): Connects to the
composite video signal input of a piece of video
equipment.
Y/C IN (Mini DIN 4-pin): Connects to the Y/C
signal output of a piece of video equipment.
AUDIO IN (Stereo minijack): Inputs an audio
signal. Connects to the audio output of a piece of
video equipment.
) signal. See "Pin
9
(GB)