Advertisement
4.2.5.
Install the pipe into the bottom of the plunger.
4.2.6.
Press plunger into the top of the connector.
4.3.
CONNECTION TO MAINS SUPPLY
4.3.1.
Seek advice from a plumber in order to ensure correct connection to the mains supply.
4.4.
WASTE BASKET ASSEMBLY
4.4.1.
Assemble as per fig.2.
5. MAINTENANCE
5.1.
Clean directly after use using a soft sponge and mild detergent.
5.2.
To refill soap dispenser simply pull the plunger upwards (fig.1) and fill from there.
5.3.
Then replace plunger.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
fig.1
01284 703534
sales@sealey.co.uk
Original Language Version
fig.2
www.sealey.co.uk
APMS67 Issue 1 21/06/2021
Advertisement
