Removing The Panel - Miele DAD 4840 Operating And Installation Instructions

Downdraft extractor
Hide thumbs Also See for DAD 4840:
Table of Contents

Advertisement

Cleaning and care
 Open the grease filter retainer catch
and remove them.
Cleaning the grease filters by hand
 Clean the filters with a soft nylon
brush in a mild solution of hot water
and a small amount of washing-up
liquid. Do not use undiluted washing
up liquid.
Unsuitable cleaning agents
Unsuitable cleaning agents can cause
damage to the surface of the filters if
used regularly.
Do not use:
- cleaning agents containing descaling
agents,
- powder cleaners or cream cleaners,
- aggressive all-purpose cleaning
agents or spray cleaners for grease,
- oven sprays.
36
Cleaning the grease filters in the
dishwasher
 Place the grease filters upright or
slightly inclined in the lower basket.
Ensure the spray arm is not
obstructed.
 Use a standard household
dishwasher detergent.
 Select a dishwasher programme with
a wash temperature between 50 °C
and 65 °C.
Depending on the detergent used,
cleaning the filters in the dishwasher
may cause the inside filter surfaces to
become discoloured. This will not
affect the functioning of the grease
filters in any way.
 After cleaning, leave the filters to dry
on an absorbent surface before
refitting them.

Removing the panel

 Pull the opened panel up and out to
remove it and place it on a soft
surface.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dad 4940

Table of Contents