Installing The Joystick - Toro Groundsmaster 360 Installation Instructions Manual

3
Installing the Joystick Pod
Mounting Bracket
Parts needed for this procedure:
1 Joystick pod mounting bracket
2 Carriage bolt
1 Clip
Procedure
1. Attach the clip to the front hole in the joystick pod
mounting bracket (Figure
2. Install the joystick pod mounting bracket to the right
side of the seat plate
bolts and the nuts that you removed in step
Routing the Joystick Wire Harness (page
1. Carriage bolts
3. Plug the plastic snap connector from the wire harness
into the hole in the joystick pod mounting bracket.
3).
(Figure 3) using the longer carriage
3
3).
G018187
Figure 3
2. Joystick pod mounting
bracket
4

Installing the Joystick

Parts needed for this procedure:
1 Joystick
2 Clip
1 Joystick pod cover
1 Joystick pod
2 Hex-head screw (1/4 x 5/8 inch)
1 Knob
1 Decal
Procedure
1. Assemble the joystick
of 2
Note: Ensure that the heads of the 6 screws in the
joystick handle are oriented toward the rear of the
machine.
1
2
4
(Figure 4).