Haier YR-E16b User Manual page 29

New/old protocol
Self-adaption is default. The function is used for basic settings.
Do not reset it or the controller may not work normally.
Power off memory
If the function is set on, the wired controller will maintain the
previous state in temperature, fan speed, etc from in outage to
power up again.
Main/Sub set
Wired controller can be set as main controller or Sub controller
through this function. Sub controller can only control some of
the functions.
Ambient temperature revision
The revision value is only valid for wired controller ambient
temperature. Press enter key to make the arrows static and
adjust the temperature using the Left/Right key.
WIRED CONTROLLER Page 29
49-5000680 Rev. 0