Table of Contents
Advertisement
BACnet Gateway for VRF System
8.3 Connection
Use this section to configure the connection between the laptop or desktop to the gateway.
NOTE: If using IP connection, the Configuration Tool will automatically scan the IP network for the
gateway and will show it in the list. Notice that in that case, a password is required. Default values for
IP connection are: IP: 192.168.100.246 / Password: admin
If installing more than one BACnet Gatewy for VRF System, connect them one by one and assign an
IP to each of them in case DHCP is not available.
Figure 8.2 Get Project from Device view
Figure 8.3 Connection configuration
Copyright© 2021 Fujitsu General Limited - All rights reserved
INSTRUCTION MANUAL r1.4.0 eng
145/159
Advertisement
Table of Contents
