Contents Notice Compliance Important Connect Place the wireless receiver Connect the wireless transmitter Connect rear speakers to wireless receiver Connect power cord Troubleshooting 4 Product specifications...
This product is in compliance with the essential requirements and other relevant provisions of Directives 2006/95/EC (Low Voltage), 2004/108/ EC (EMC). Hereby, Philips Consumer Lifestyle, declares that this Wireless Rear Audio System RWSS5510, RWSS9500 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Connect Place the wireless receiver Place the wireless receiver near the AC outlet and in between the rear speakers. Align the wireless receiver with the home theater, with Philips logo facing the home theater. WIRELESS RECEIVER Note • For best reception, make sure that the line-...
Connect rear speakers to wireless receiver Note • The rear speakers in the picture showed may vary. For RWSS5510 REAR REAR RIGHT LEFT REAR LEFT REAR RIGHT Connect the speaker adapters, rear left, and rear right speakers to the matching connectors at the bottom of the wireless receiver.
Troubleshooting Follow these steps if: • there is no sound from the rear speakers, • the indicator on the wireless receiver blinks continuously for more than one minute. For home theater with Blu-ray Disconnect the power cord and the speaker cables from the wireless receiver for one minute, and place the wireless receiver near the home theater.