Table of Contents
Advertisement
Apparatus shall not be exposed to dripping or splashing.
o
Do not place any sources of danger on the apparatus (e.g.
p
liquid filled objects, lighted candles).
Important notes for users in the U.K.
How to connect a plug
The wires in the mains lead are coloured with the following code:
blue = neutral (N), brown = live (L).
As these colours may not correspond with the colour markings
identifying the terminals in your plug, proceed as follows:
•
Connect the blue wire to the terminal marked N or
coloured black.
•
Connect the brown wire to the terminal marked L or
coloured red.
•
Do not connect either wire to the earth terminal in the plug,
marked E (or e) or coloured green (or green and yellow).
Before replacing the plug cover, make certain that the cord
grip is clamped over the sheath of the lead - not simply over
the two wires.
Mains plug
This apparatus is fitted with an approved 13 Amp plug. To change
a fuse in this type of plug proceed as follows:
Remove fuse cover and fuse.
a
Fix new fuse which should be a BS1362 3 Amp, A.S.T.A. or
b
BSI approved type.
Refit the fuse cover.
c
If the fitted plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place.
If the mains plug contains a fuse, this should have a value of 3 Amp.
If a plug without a fuse is used, the fuse at the distribution board
should not be greater than 3 Amp.
Advertisement
Table of Contents
