•
Directory nesting up to a maximum of 8
levels
•
Number of albums/ folders: maximum 99
•
Number of tracks/titles: maximum 999
•
ID3 tag v2.0 or later
•
File name in Unicode UTF8 (maximum
length: 128 bytes)
Unsupported formats:
•
Empty albums: an empty album is an
album that does not contain MP3/WMA
files, and is not be shown in the display.
•
Unsupported file formats are skipped. For
example, Word documents (.doc) or MP3
files with extension .dlf are ignored and
not played.
•
AAC, WAV, PCM audio files
•
DRM protected WMA files (.wav, .m4a,
.m4p, .mp4, .aac)
•
WMA files in Lossless format
Supported MP3 disc formats
•
ISO9660, Joliet
•
Maximum title number: 999 (depending
on file name length)
•
Maximum album number: 99
•
Supported sampling frequencies: 32 kHz,
44.1kHz, 48 kHz
•
Supported Bit-rates: 32-320 (kbps),
variable bit rates
•
ID3 tag v2.0 or later
•
Directory nesting up to a maximum of 8
levels
Maintenance
Clean the cabinet
•
Use a soft cloth slightly moistened with
a mild detergent solution. Do not use
a solution containing alcohol, spirits,
ammonia or abrasives.
Clean discs.
•
When a disc becomes dirty,
clean it with a cleaning
cloth. Wipe the disc from
the centre out
•
Do not use solvents such as benzene,
thinner, commercially available cleaners,
or antistatic spray intended for analogue
records.
Clean the disc lens
•
After prolonged use, dirt or dust may
accumulate at the disc lens. To ensure
good play quality, clean the disc lens
with Philips CD lens cleaner or any
commercially available cleaner. Follow the
instructions supplied with cleaner.
11 Troubleshooting
Warning
•
Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site www.
philips.com/welcome. When you contact Philips,
ensure that the apparatus is nearby and the
model number and serial number are available.
No power/No sound
•
Ensure that the AC power plug of the
unit is connected properly.
•
Ensure that there is power at the AC
outlet.
•
Ensure that the batteries are installed
correctly.
•
Adjust the volume.
•
The file is a non-audio one. Select an
audio file.
No response from the unit
•
Disconnect and reconnect the AC power
plug, then turn on the unit again.
No disc detected
•
Insert a disc.
•
Check if the disc is inserted with the print
side facing inward.
EN
15