Fig. 45: Installing Nozzle Ring 2; Table 35: Tightening Torque (56014) - ABB A170-M62 Operation Manual

Operation Manual / 4 Product description / A100-M axial
8 Disassembly and assembly / 8.8 Installing the nozzle ring
Fig. 45: Installing nozzle ring 2
Product
A170-M
A175-M
Table 35: Tightening torque (56014)
6. Loosen nuts (61037) and remove guide plate (90328).
7. Loosen screws (90339) and remove retaining plate (90338) with guide rod (90336).
8. Coat the threads of screws (56014) and the contact surface between screw and locking
washer with high-temperature grease.
9. Fit the nozzle ring (56001) on the gas inlet casing (51001) using the screws (56014) and
locking washers (56015).
10. Bend over locking washers (56015).
© Copyright 2019 ABB. All rights reserved.
Size
M10
M10
HZTL4033_EN
Tightening torque [Nm]
50
50
Rev.D December 2019