Page 1
OWNER’S MANUAL Ultra Slim Super Multi DVD Writer To enjoy fully all the features and functions of your product, please read this owner’s manual carefully and completely. GS40N...
Safety Instructions The laser used in the writer can damage your eyes. Do not CAUTION: attempt to open the cover. To reduce the risk of electric shock, do not remove the cover (or back). There are no user-serviceable parts inside. Refer servicing to qualified service personnel.
Introduction Drive Description This drive reads and writes to CD and DVD media. This drive has a 9.5 mm slot form factor. Features of the Drive • 9.5 mm height internal slim Super Multi DVD Drive. • CD-R/RW, DVD-R/-R DL/ -RW/ +R/ +R DL/ +RW, DVD-RAM read and write compatible.
Using the Drive Drive Operation Front Panel This following is the general figure of the design of the drive. The drive’s appearance and specifications may change without prior notice. Disc slot Indicator (Power, Access) Eject button 1. Disc slot This is the slot for the disc. Insert a disc on the disc slot, and then lightly push the disc.
Page 6
Inserting a Disc • Insert the disc, label-side up, about quarter-way into the drive slot till a slight resistance is felt. • Gently push the disc further into the drive slot until the drive mechanism is heard to engage and draw in the disc. Release the disc when the disc is pulled in by the mechanism.
Cleaning Media If dust or fingerprints get on the disc, wipe it with a soft cloth from the center to the edge. CAUTION: Do not use benzene, paint thinner, record cleaner, solvent, or static repellent. This can damage the disc. Cleaning the Drive Cleaning the inside of the drive is not recommended.
Troubleshooting Please refer to the Introduction section to determine if the drive in your system is a slim device. Symptoms and Solutions Symptoms Solutions 1. Drive is not 1-1. Turn off the system, remove the drive, and re-insert back recognized by to the system.
Page 9
Symptoms Solutions 7. Cannot write to disc 7-1. Is the disc loaded in the drive with the read/write surface (for drives with write facing the right direction? The label should be up. If a disc capability). does not have a label, the disc code on the inner side of the disc should be properly oriented for reading when looking from the top of the disc.