Cleaning The Power Floor/Carpet Nozzle; Cleaning The Power Punch Nozzle - LG CordZero A90 Series Owner's Manual

Cleaning the Power
Floor/Carpet Nozzle
Check the brush and roller heads before using and
clean as needed.
1
Remove the nozzle from the product. Press
the release button to remove the head from the
wand or product body.
2
Turn the head upside down and insert a flat-
blade screwdriver in the cover lock slot. Rotate
the lock counterclockwise as shown to open the
cover.
3
Rotate the brush cover up and pull the brush
out.
①
②
4
Attach the crevice tool to the unit and use the
vacuum to remove dust/foreign objects from the
brush and the bottom of the nozzle.
Rotating
brush
5
Use a wet towel or tissue to remove any
remaining foreign matter and dust from the
brush and the bottom of the nozzle.
Rotating
brush
6
Slide the brush back into the head and rotate
the cover back into place. Turn the cover lock
clockwise to lock the cover.
②
①
18
Cover lock
CAUTION
•
Keep fingers away from pinch points when
removing and assembling the brush.
•
Do not immerse the brush or head in water or rinse
them in running water.
•
Do not pick up oils or liquids with the vacuum.
Cleaning the Power Punch
Nozzle
1
Remove the Power Punch Nozzle and turn it
upside down.
2
Attach the crevice tool to the unit and use the
vacuum to remove dust/foreign objects from the
bottom of the Power Punch Nozzle.
3
Use a wet towel or tissue to move any remaining
foreign matter and dust.
WARNING
•
Do not immerse the Power Punch Nozzle in water
or rinse it in running water.
•
Do not suck any liquids including water into the
Power Punch Nozzle.