Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision Date Description 1.00 July 7, 2017 • Initial release for revision A1 Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link.
Home ..................22 USB Sharing ..............54 Internet ................22 Features ..................55 DIR-882 ................23 QoS Engine ...............55 Connected Clients ............24 Firewall Settings .............56 USB Device ...............25 IPv4/IPv6 Rules ...............58 Settings ..................26 Port Forwarding .............59 Wizard ................26 Virtual Server ..............60 D-Link DIR-882 User Manual...
Page 4
Upgrade ................74 Statistics ................75 Warranty .................117 Connect a Wireless Client to your Router ......76 Registration ..............124 WPS Button ...................76 Windows® 10 ................77 Windows® 8 ...................79 Windows® 7 ...................81 WPA/WPA2 ................81 WPS ..................84 Windows Vista® ................88 WPA/WPA2 ................89 D-Link DIR-882 User Manual...
Section 1 - Product Overview Product Overview Package Contents DIR-882-US AC2600 MU-MIMO Wi-Fi Router Power Adapter Ethernet Cable Wi-Fi Configuration Card Quick Install Guide If any of the above items are missing, please contact your reseller. Note: Using a power supply with a different voltage rating than the one included with the DIR-882 will cause damage and void the warranty for this product.
Users: Make sure you have the latest version of Java installed. Visit ® www.java.com to download the latest version. For requirements refer to QRS Mobile page at: QRS Mobile Requirements • iTunes Store (App Store > Utilities > D-Link Systems) • Google Play (Click link to www.dlink.com/qrsmobileapp) D-Link DIR-882 User Manual...
Environmental conditions will adversely affect wireless signal range. Multi-User MIMO (MU-MIMO) enabled clients needed for optimal performance. D-Link DIR-882 User Manual...
WPS Button Press to start the WPS process. Wi-Fi Button Press to turn on/off the wireless function. Power Port Connect the supplied power adapter. Power Button Press to power the router on and off. D-Link DIR-882 User Manual...
USB 2.0 LED A solid white light indicates a USB 2.0 device is connected (back port). Connect a USB flash drive to share content throughout your network. Supports USB 3.0 and USB 3.0 Port USB 2.0 devices. D-Link DIR-882 User Manual...
• Advanced Users - If your ISP provided you with a modem/router combo, you will need to set it to “bridge” mode so the DIR-882 can work properly. For details, contact your ISP or refer to the user manual for your modem/router device. D-Link DIR-882 User Manual...
RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines: 1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum - each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that...
2. Connect an Ethernet cable from the Internet port of the router to the Ethernet port on your cable or DSL modem. Ethernet Cable Ethernet Port DIR-882 - • + USB 2.0 INTERNET RESET WiFi 12V. . .1.5A POWER Modem Internet Port (yellow) D-Link DIR-882 User Manual...
Page 13
WiFi 12V. . . 1.5A POWER Modem Computer * If you are connecting wirelessly, you may now connect to the router using the supplied Wi-Fi Configuration Card for the Wi-Fi network name (SSID) and Wi-Fi password. D-Link DIR-882 User Manual...
Page 14
INTERNET 12V --1.5A POWER DIR-882 Wireless - • + Computer USB 2.0 INTERNET RESET WiFi 12V...1.5A POWER Modem Computer 6. After the router has powered up, verify that the LED is lit. Proceed with router configuration. D-Link DIR-882 User Manual...
There are several different ways you can configure your router to connect to the Internet and connect to your clients: • D-Link Setup Wizard - This wizard will launch when you log into the router for the first time using your web browser.
IP address of the router (192.168.0.1). The wizard will guide you through a step-by-step process to configure your new D-Link router and connect to the Internet. When the welcome screen appears, click Next to continue. Wait a few moments while your router detects your Internet connection type.
Page 17
(PPPoE), enter your PPPoE username and password supplied by your ISP. Click Next to continue. Note: Make sure you remove your PPPoE software from your computer. The software is no longer needed and will not work through a router. D-Link DIR-882 User Manual...
Page 18
32 characters. Create a Wi-Fi password (between 8-63 characters). Your wireless devices will need to have this passphrase or key entered to be able to connect to your wireless network. Click Next to continue. D-Link DIR-882 User Manual...
Page 19
The Summary window will display your settings. Click Back if you find it necessary to make changes. When the settings are correct, make a note of the of them so you can configure your Wi-Fi devices. Click Next to continue. D-Link DIR-882 User Manual...
Page 20
Section 3 - Configuration At the end of the wizard, you will see a final summary of your settings. Click Finish to close the wizard. D-Link DIR-882 User Manual...
Wi-Fi password. http://dlinkrouter.local. Or http://192.168.0.1 Username: “Admin” Password:” “ (leave the field blank) Step 3 Once you connect to the router, tap on the QRS Mobile icon to launch the QRS mobile app from your mobile device. D-Link DIR-882 User Manual...
Page 22
Ethernet cable into your DSL or cable modem, and plug the other end into the port marked INTERNET on the DIR-882. Tap Next to automatically detect your Internet connection and proceed to the next step. D-Link DIR-882 User Manual...
Page 23
Enter the Device Password (Admin Password) of your choice. Unlike the Wi-Fi password, this password is only required when you need to configure the router. Refer to "Web-based Configuration Utility" on page to learn how this password is used. Tap Next to proceed. D-Link DIR-882 User Manual...
Page 24
You will see a summary of your settings. If you need to make any changes, tap Back to step back through the previous pages. Otherwise, tap Next to complete the setup. Congratulations, your device has been successfully configured! You may now exit the QRS Mobile app. D-Link DIR-882 User Manual...
The bar at the top of the page has quick access to Settings, Features, and Management functions. You may easily navigate back Home at any time. Note: The system will automatically time-out after a period of inactivity. (You will have to log back in as described above.) D-Link DIR-882 User Manual...
To view details about your Internet connection, click on the Internet icon. Click Release IP Address to disconnect from the Internet. If you do this and wish to reconnect, click Renew. To reconfigure the Internet settings, refer to "Internet" on page D-Link DIR-882 User Manual...
Page 27
To reconfigure the router's wireless settings, either click Go to settings (at the bottom right side of the page), or click Settings (at the top of the page) and then Wireless from the drop-down menu that appears. Refer to page 49. D-Link DIR-882 User Manual...
IP address. Parental Enable to block access to your router and then select a schedule you Control: want the rule to be active from the drop-down menu. Click Save when you are done. D-Link DIR-882 User Manual...
(SAMBA). If you have a USB device connected, you can see its name and how much free space it has. Click Go to Settings to take you to the USB Sharing section. Refer to page 54. D-Link DIR-882 User Manual...
For Dynamic IP (DHCP) refer to page 27. For Static IP refer to page 28. For PPPoE refer to page 29. For PPTP refer to page 30. For L2TP refer to page 32. For DS-Lite refer to page 34. D-Link DIR-882 User Manual...
The default MAC address is set to the Internet port’s physical interface Clone: MAC address on the router. You can use the drop-down menu to replace the Internet port’s MAC address with the MAC address of a connected client. Click Save when you are done. D-Link DIR-882 User Manual...
The default MAC address is set to the Internet port’s physical interface Clone: MAC address on the router. You can use drop-down menu to replace the Internet port’s MAC address with the MAC address of a connected client. Click Save when you are done. D-Link DIR-882 User Manual...
The default MAC address is set to the Internet port’s physical interface Clone: MAC address on the router. You can use drop-down menu to replace the Internet port’s MAC address with the MAC address of a connected client. Click Save when you are done. D-Link DIR-882 User Manual...
Enter the PPTP Gateway IP Address provided by your ISP (for Static IP Address: IP only). Enter the Primary DNS Server IP address assigned by your ISP. Primary DNS Server: Secondary DNS Enter the Secondary DNS Server IP address assigned by your ISP. Server: D-Link DIR-882 User Manual...
Page 35
Section 3 - Configuration MTU: Maximum Transmission Unit - by default this field will be set to Auto. Select Manual if you need to change the MTU for optimal performance with your ISP. Click Save when you are done. D-Link DIR-882 User Manual...
Enter the L2TP Gateway IP Address provided by your ISP (for L2TP Gateway IP Address: Static IP only). Primary DNS Enter the Primary DNS Server IP address assigned by your ISP. Server: Enter the Secondary DNS Server IP address assigned by your ISP. Secondary DNS Server: D-Link DIR-882 User Manual...
Page 37
Section 3 - Configuration MTU: Maximum Transmission Unit - by default this field will be set to Auto. Select Manual if you need to change the MTU for optimal performance with your ISP. Click Save when you are done. D-Link DIR-882 User Manual...
Address: WAN IPv6 Once connected, the WAN IPv6 address will be displayed here. Address: IPv6 WAN Once connected, the IPv6 WAN Default Gateway address will be Default displayed here. Gateway: Click Save when you are done. D-Link DIR-882 User Manual...
For PPPoE refer to page 40. For IPv6 in IPv4 Tunnel refer to page 42. For 6 to 4 refer to page 44. For 6rd refer to page 45. For Local Connectivity Only refer to page 47. D-Link DIR-882 User Manual...
Enable or disable Automatic DHCP-PD in LAN services. DHCP-PD in LAN: Select SLAAC + RDNSS, SLAAC + Stateless DHCP, or Stateful Autoconfiguration Type: DHCPv6. Router Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DIR-882 User Manual...
Displays the router’s LAN IPv6 Link-Local Address. Local Address: Enable Automatic Enable or disable the Automatic IPv6 Address Assignment feature. IPv6 Address Assignment: Autoconfiguration Select SLAAC + RDNSS, SLAAC + Stateless DHCP, or Stateful DHCPv6. Type: D-Link DIR-882 User Manual...
Page 42
Section 3 - Configuration Router Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DIR-882 User Manual...
Enable or disable Automatic DHCP-PD in LAN services. Enable Automatic DHCP-PD in LAN: Autoconfiguration Select SLAAC + RDNSS, SLAAC + Stateless DHCP, or Stateful DHCPv6. Type: Router Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DIR-882 User Manual...
Select either Obtain DNS server address or Use the following DNS . DNS Type: If you selected Use the following DNS, enter the Primary DNS Primary DNS Server: Server address. Secondary DNS If you selected Use the following DNS, enter the Secondary DNS Server address. Server: D-Link DIR-882 User Manual...
Page 45
Enable or disable the Automatic IPv6 Address Assignment feature. Automatic IPv6 Address Assignment: Auto Select SLAAC + RDNSS, SLAAC + Stateless DHCP or Stateful DHCPv6. Configuration Type: Router Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DIR-882 User Manual...
Enable DHCP- Enable or disable prefix delegation services. LAN IPv6 If you disabled DHCP-PD, enter the LAN (local) IPv6 address for the Address: router. LAN IPv6 Link- Displays the router’s LAN IPv6 Link-Local Address. Local Address: D-Link DIR-882 User Manual...
Page 47
Enable or disable Automatic DHCP-PD in LAN services. DHCP-PD in LAN: Autoconfiguration Select SLAAC + RDNSS, SLAAC + Stateless DHCP, or Stateful Type: DHCPv6. Router Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DIR-882 User Manual...
Click to enable the Automatic IPv6 Address Assignment feature. IPv6 Address Assignment: Autoconfiguration Select SLAAC + RDNSS or SLAAC + Stateless DHCP, or Stateful DHCPv6. Type: Router Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DIR-882 User Manual...
Enter the 6rd border relay IPv4 Address supplied by your ISP (for 6rd Border Relay IPv4 manual configuration only). Address: LAN IPv6 Displays the LAN (local) IPv6 address for the router. Address: LAN IPv6 Link- Displays the router’s LAN Link-Local Address. Local Address: D-Link DIR-882 User Manual...
Page 50
Click to enable the Automatic IPv6 Address Assignment feature. IPv6 Address Assignment: Autoconfiguration Select SLAAC + RDNSS, SLAAC + Stateless DHCP, or Stateful Type: DHCPv6. Router Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DIR-882 User Manual...
When ULA is enabled, you may also enable automatic configuration ULA Prefix: of the ULA prefix. Current ULA Will display the Current ULA Prefix. Prefix: LAN IPv6 ULA: Will display the LAN IPv6 ULA. Click Save when you are done. D-Link DIR-882 User Manual...
If enabled, select the priority for each service. Priority tags are between 0 to 7 with 0 being assigned to the lowest priority and 7 assigned to the highest. Interface Traffic Select which port/band you want to assign each service from the drop- Type Setting: down menu. D-Link DIR-882 User Manual...
The available options will depend on the wireless frequency band, as well as the currently selected security mode. Wi-Fi Channel: Select the desired channel. The default is Auto (recommended). Advanced Settings Transmission Select the desired wireless transmission power (High, Medium or Power: Low). D-Link DIR-882 User Manual...
Page 54
Use the drop-down menu to select a schedule for enabling the rule. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section (refer to page 68). Click Save when you are done. D-Link DIR-882 User Manual...
Internet Access Enabling this option will limit connectivity to the Internet. Guests Only: will not be allowed to access other local network devices. Click Save when you are done. D-Link DIR-882 User Manual...
Local Domain Enter the Local Domain Name (optional). Name: Enable DNS If enabled, your computers will use the router for a DNS server. Relay: Disable to transfer the DNS server information from your ISP to your computers. D-Link DIR-882 User Manual...
Page 57
Enable to allow IPv4 multicast traffic to pass through the router from Streams: the Internet. IPv6 Multicast Enable to allow IPv6 multicast traffic to pass through the router from Streams: the Internet. Click Save when you are done. D-Link DIR-882 User Manual...
Enable to allow users from the Internet to access your USB drive. Sharing: FTP Server Port: Enter a port for your FTP server. Default is 21. Idle Time: Enter the time in minutes where the user will be logged off if idle. Default is 5 minutes. D-Link DIR-882 User Manual...
If you want to remove a priority assignment from a device and return it to the Connected Clients list, click the cross icon in the top right corner of the device card. Click Save when you are done. D-Link DIR-882 User Manual...
IPv6 Ingress Click to enable IPv6 Ingress Filtering, which will verify the incoming Filtering: packets are coming from the network from which they claim to originate. Click Advanced Settings to expand the list and view more options. D-Link DIR-882 User Manual...
Page 61
NAT devices and work around them. This Application Level Gateway (ALG) may interfere with the operation of such devices. If you are having trouble making VoIP calls, try turning this ALG off. Click Save when you are done. D-Link DIR-882 User Manual...
Use the drop-down menu to select a Schedule when the rule will be enabled. The schedule may be set to Always Enable, or you can create a schedule from the Schedules section (refer to page 68). Click Apply when you are done. D-Link DIR-882 User Manual...
Use the drop-down menu to select a Schedule when the rule will be enabled. The schedule may be set to Always Enable, or you can create a schedules from the Schedules section (refer to page 68). Click Apply when you are done. D-Link DIR-882 User Manual...
Use the drop-down menu to select a schedule when the rule will be enabled. The schedule may be set to Always Enable, or create your own schedule from the Schedules section (refer to page 68). Click Apply when you are done. D-Link DIR-882 User Manual...
Add Rule. Next, under Website URL/Domain enter the URL or domain. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, simply replace the URL or domain. Click Save when you are done. D-Link DIR-882 User Manual...
A value 1 is the lowest cost and 15 is the highest cost. Interface: Select the interface that the IP packet must use to transit out of the router when this route is used. Click Apply when you are done. D-Link DIR-882 User Manual...
A value 1 is the lowest cost and 15 is the highest cost. Interface: Select the interface that the IP packet must use to transit out of the router when this route is used. Click Apply when you are done. D-Link DIR-882 User Manual...
Time Out: Enter a Time Out (in hours). Click Save when you are done. At the bottom of the page are the IPv6 host settings. To configure an IPv6 dynamic DNS host, refer to page 65. D-Link DIR-882 User Manual...
Enter the Host Name that you registered with your dynamic DNS service provider. IPv6 Address: Enter the IPv6 Address of the dynamic DNS server. Or, select the Computer Name from the drop-down menu. Click Apply when you are done. D-Link DIR-882 User Manual...
VPN will need to enter this key. Authentication Select either MSCHAPv2, PAP (Password Authentication Protocol), Protocol: or CHAP (Challenge-Handshake Authentication Protocol). MPPE: Select either None, RC4-40, or RC4-128 (encryption). Click Save when you are done. D-Link DIR-882 User Manual...
Update Time Using NTP Server option and use the drop-down menus that appear to input the time and date. Click Save when you are done. To configure and manage your schedules, click Schedule and refer to page 68. D-Link DIR-882 User Manual...
You can add multiple days to the schedule, but only one period per day. To remove a time period from the schedule, click on the X icon at the end of the row. Click Apply when you are done. D-Link DIR-882 User Manual...
The schedule may be set to Always Enable, or you can create your own schedule from the Schedules section (refer to page 68). Click Save when you are done. D-Link DIR-882 User Manual...
HTTPS Server, you must enter https:// as part of the URL to access the router remotely. Click Save when you are done. To load, save, or reset the settings, or to reboot the router, click System and refer to page 71. D-Link DIR-882 User Manual...
If you want to first save the current router configuration settings to your computer, use the Save button above. Reboot The Click Reboot to reboot the router. Device: Auto Reboot: Select a time frame for the router to reboot automatically. D-Link DIR-882 User Manual...
To change the selected folder, click Browse and browse to the desired folder. VPN: Enable to give the user Open VPN access. Click OK to save. D-Link DIR-882 User Manual...
DHCP, select the device from the drop-down menu. Schedule: Select a schedule when you want the rule to apply. Click Schedule to create a new time range. Click Apply to save. D-Link DIR-882 User Manual...
Section 3 - Configuration Upgrade This page will allow you to upgrade the router’s firmware, either automatically or manually. To manually upgrade the firmware, you must first download the file from http://support.dlink.com/DIR-882-US. From the Management menu, click Upgrade. Firmware Displays the Current Firmware Version and Current Firmware Date.
You can view the Internet, LAN, Wi-Fi 2.4GHz, or Wi-Fi 5GHz statistics by clicking on the respective tabs at the top. The graph will update in real time. To clear the information on the graph, click Clear. The traffic counter will reset if the device is rebooted. D-Link DIR-882 User Manual...
Step 2 - Within two minutes, press the WPS button on your wireless client (or launch the software utility and start the WPS process). Step 3 - Allow up to one minute for your connection to be configured. Once the Power LED stops blinking, you will be connected and your wireless connection will be secure with WPA2. D-Link DIR-882 User Manual...
To join an existing network, click the wireless network icon in the taskbar, next to the time display. Wireless Icon A list of wireless networks which are within range of your computer will appear. Select the desired network by clicking on the SSID. D-Link DIR-882 User Manual...
Page 82
You can also use Wi-Fi Protected Setup (WPS) to connect to the router. Press the WPS button on your D-Link device and you will be automatically connected. D-Link DIR-882 User Manual...
Wireless Icon Clicking on this icon will display a list of wireless networks that are within connecting proximity of your computer. Select the desired network by clicking on the network name. D-Link DIR-882 User Manual...
Page 84
WPS button on your router during this step to enable the WPS function. When you have established a successful connection to a wireless network, the word Connected will appear next to the name of the network to which you are connected to. D-Link DIR-882 User Manual...
If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Click on the wireless icon in your system tray (lower-right corner). Wireless Icon 2. The utility will display any available wireless networks in your area. D-Link DIR-882 User Manual...
Page 86
If you get a good signal but cannot access the Internet, check your TCP/ IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. 4. The following window appears while your computer tries to connect to the router. D-Link DIR-882 User Manual...
Page 87
It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router. D-Link DIR-882 User Manual...
The WPS feature of the DIR-882 can be configured using Windows® 7. Carry out the following steps to use Windows® 7 to configure the WPS feature: 1. Click the Start button and select Computer from the Start menu. 2. Click Network on the left side. D-Link DIR-882 User Manual...
Page 89
Section 5 - Connecting to a Wireless Network 3. Double-click the DIR-882. 4. Input the WPS PIN number (on the router label) in the Setup > Wireless Setup menu in the Router’s Web UI) and click Next. D-Link DIR-882 User Manual...
Page 90
Section 5 - Connecting to a Wireless Network 5. Type a name to identify the network. 6. To configure advanced settings, click the icon. Click Next to continue. D-Link DIR-882 User Manual...
Page 91
Make a note of the security key as you may need to provide this security key if adding an older wireless device to the network in the future. 9. Click Close to complete WPS setup. D-Link DIR-882 User Manual...
(displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DIR-882 User Manual...
1. Open the Windows Vista® Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network. 2. Highlight the Wi-Fi name (SSID) you would like to connect to and click Connect. D-Link DIR-882 User Manual...
Page 94
It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router. D-Link DIR-882 User Manual...
1. Why can’t I access the web-based configuration utility? When entering the IP address of the D-Link router (192.168.0.1 for example), you are not connecting to a website, nor do you have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility.
Page 96
Section 6 - Troubleshooting • Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for your web management. • If you still cannot access the configuration, unplug the power to the router for 10 seconds and plug back in. Wait about 30 seconds and try accessing the configuration.
Page 97
• Windows® 8, 7, and Vista® users type in cmd and press Enter (or click OK). • Once the window opens, you’ll need to do a special ping. Use the following syntax: ping [url] [-f] [-l] [MTU value] Example: ping yahoo.com -f -l 1472 D-Link DIR-882 User Manual...
Page 98
• To change the MTU, enter the number in the MTU field and click Save Settings to save your settings. • Test your e-mail. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. D-Link DIR-882 User Manual...
D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business, or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when, and where you want it. You will be able to enjoy the freedom that wireless networking delivers.
D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network. How does wireless work? Wireless works similarly to how cordless phones work, through radio signals that transmit data from one point A to point B.
Page 101
Who uses wireless? Wireless technology as become so popular in recent years that almost everyone is using it, whether it’s for home, office, business, D-Link has a wireless solution for it. Home Uses/Benefits • Gives everyone at home broadband access •...
The wireless connection in public places is usually called “hotspots”. Using a D-Link Cardbus Adapter with your laptop, you can access the hotspot to connect to the Internet from remote locations like: Airports, Hotels, Coffee Shops, Libraries, Restaurants, and Convention Centers.
An Infrastructure network contains an Access Point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. An Ad-Hoc network contains only clients, such as laptops with wireless cardbus adapters. All the adapters must be in Ad-Hoc mode to communicate. D-Link DIR-882 User Manual...
This will display the IP address, subnet mask, and the default gateway of your adapter. If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a DHCP request on newly installed adapters. D-Link DIR-882 User Manual...
Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DIR-882 User Manual...
WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public key encryption system to ensure that only authorized network users can access the network. D-Link DIR-882 User Manual...
Maximum wireless signal rate derived from IEEE Standard 802.11ac, 802.11g, and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range. D-Link DIR-882 User Manual...
• Hardware Revision (located on the label on the bottom of the router [e.g., rev A1]) • Serial Number (s/n number located on the label on the bottom of the router). You can find software updates and user documentation on the D-Link website as well as frequently asked questions and answers to technical issues.
WRITTEN OFFER FOR GPL AND LGPL SOURCE CODE Where such specific license terms entitle you to the source code of such software, D-Link will provide upon written request via email and/or traditional paper mail the applicable GPL and LGPLsource code files via CD-ROM for a nominal cost to cover shipping and media charges as allowed under the GPL and LGPL.
Page 110
To prevent this, the GPL assures that patents cannot be used to render the program non-free. The precise terms and conditions for copying, distribution and modification follow. D-Link DIR-882 User Manual...
Page 111
A “Standard Interface” means an interface that either is an official standard defined by a recognized standards body, or, in the case of interfaces specified for a particular programming language, one that is widely used among developers working in that language. D-Link DIR-882 User Manual...
Page 112
Conveying under any other circumstances is permitted solely under the conditions stated below. Sublicensing is not allowed; section 10 makes it unnecessary. D-Link DIR-882 User Manual...
Page 113
If the work has interactive user interfaces, each must display Appropriate Legal Notices; however, if the Program has interactive interfaces that do not display Appropriate Legal Notices, your work need not make them do so. D-Link DIR-882 User Manual...
Page 114
Corresponding Source of the work are being offered to the general public at no charge under subsection 6d. A separable portion of the object code, whose source code is excluded from the Corresponding Source as a System Library, need not be included in conveying the object code work. D-Link DIR-882 User Manual...
Page 115
If additional permissions apply only to part of the Program, that part may be used separately under those permissions, but the entire Program remains governed by this License without regard to the additional permissions. D-Link DIR-882 User Manual...
Page 116
Additional terms, permissive or non-permissive, may be stated in the form of a separately written license, or stated as exceptions; the above requirements apply either way. D-Link DIR-882 User Manual...
Page 117
Corresponding Source of the work from the predecessor in interest, if the predecessor has it or can get it with reasonable efforts. D-Link DIR-882 User Manual...
Page 119
Free Software Foundation. If the Program specifies that a proxy can decide which future versions of the GNU General Public License can be used, that proxy’s public statement of acceptance of a version permanently authorizes you to choose that version for the Program. D-Link DIR-882 User Manual...
Page 120
Program, unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee. D-Link DIR-882 User Manual...
Any repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The replacement hardware need not be new or have an identical make, model or part. D-Link may, at its option, replace the defective Hardware or any part thereof with any reconditioned product that D-Link reasonably determines is substantially equivalent (or superior) in all material respects to the defective Hardware.
Page 122
Software or to refund the portion of the actual purchase price paid that is attributable to the Software. Except as otherwise agreed by D-Link in writing, the replacement Software is provided only to the original licensee, and is subject to the terms and conditions of the license granted by D-Link for the Software.
Page 123
• The customer must submit with the product as part of the claim a written description of the Hardware defect or Software nonconformance in sufficient detail to allow D-Link to confirm the same, along with proof of purchase of the product (such as a copy of the dated purchase invoice for the product) if the product is not registered.
Page 124
Purolator Canada or any common carrier selected by D-Link. Return shipping charges shall be prepaid by D-Link if you use an address in Canada, otherwise we will ship the product to you freight collect. Expedited shipping is available upon request and provided shipping charges are prepaid by the customer.
Page 125
FOR WARRANTY SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NONCONFORMING PRODUCT.
Page 126
The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. D-Link DIR-882 User Manual...
Page 127
Les conditions de fonctionnement sont sujettes à deux conditions: (1) Ce périphérique ne doit pas causer d’interférence et. (2) Ce périphérique doit accepter toute interférence, y compris les interférences pouvant perturber le bon fonctionnement de ce périphérique. D-Link DIR-882 User Manual...
Appendix G - Registration Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 1.00 (US) July 7, 2017 D-Link DIR-882 User Manual...