Language; Factory Reset; Software Update - Kenwood CR-ST100S Operating Instructions Manual

16.4 "Standby format" menu
In this menu you can specify whether the clock should be displayed in standby mode in analogue or
digital form. Select with the <Left> or <Right> button, the confirmation is made with the <OK>but-
ton. The currently selected option is marked with"*".

17. Language

In the "Language" menu you can set the menu language of the radio. If you have started up the
device with the Setup wizard, the device language has already been set there. To select a language,
please use the <UP> or <DOWN> buttons and confirm this by pressing the <OK> button. Alternati-
vely, the selection can also be made with the <NAVIGATE> knob.
The following languages are available:
Danish, German, English, Finnish, French, Italian, Dutch, Norwegian, Polish, Portuguese, Swedish,
Spanish, Turkish.

18. Factory reset

To reset the radio to the delivery state, please select "YES" in the menu "Factory reset".
Attention: All previous settings are deleted.
If you select "NO" the process is cancelled.
Note: In any case, reset the radio to the delivery state before you pass it on (e.g. sell, give away or
disposal).

19. Software update

In this menu you can check whether a software update is available for the radio.
If you select "Auto-check setting" the radio automatically checks the availability of new software
updates on a regular basis.
Select the menu item "Check now" to search for a new version. If newer software is found, please
select "YES" to install it or "NO" to cancel the update. If "YES" the radio restarts to carry out the
process.
Then the software is downloaded and you are asked with "Proceed" whether the update should be
carried out. Please choose "YES" if you consent or "NO" to cancel the update. The "Warning: do
not remove power" and the software version to be installed flash alternately. When the process is
complete, "Update completed" appears on the display and you can confirm the process with the
<OK> button.
25