Philips HD4917/00 Manual page 14

EnglisH
14
Problem
The fan works but the
appliance has not started
cooking.
Codes on the
display
----
E1
E2
E3
E4
Solution
You have to press the Start button within 1 minute after you press
the Power on/off button.If you do not press the Start button within 1
minute, the induction cooker switches off and the fan continues to
work for 1 minute to cool down the appliance.
Message
There is no cookware
on the cooking plate or
the cookware is not
suitable for the
induction cooker.
Unstable voltage in
power supply network
The cooking plate has
overheated.
The appliance
malfunctions
The appliance has
overheated
What you should do
Place suitable cookware on the cooking plate.
Check if the voltage in your home is suitable for
the induction cooker.
Switch off the appliance and unplug it. Let it cool
down for approx. 10 minutes and then switch on
the appliance again.
Take the appliance to a Philips dealer or a service
centre authorised by Philips.
Check if the air outlet is covered. If so, remove the
object covering the air outlet and let the appliance
cool down. Then switch on the appliance again.
If the air outlet is not covered, check if the fan
works. Switch on the appliance and press the Start
button. If the fan does not work, take the appliance
to your Philips dealer or a service centre
authorised by Philips.