Motorola SCOUT2300/2 Quick Start Manual

MODELS:
SCOUT2300,
SCOUT2300/2,
SCOUT2300/3,
SCOUT2300/4
QUICK START GUIDE
For a full explanation of all features and instructions, please refer to the User's Guide.
1. Setting up your Digital Video Pet Monitor
A. Connecting power supply for the Pet unit
C. Fastening the cover for the Owner unit
WARNING:
STRANGULATION HAZARD - In case this unit is being to monitor infants or children, keep the unit and adapter cord more than 3 feet from the crib and out
of their reach. Never place camera or cords within a crib or near a bed. Secure the cord away from children's reach. Never use extension cords with AC
Adapters. Only use the AC Adapters provided.
As with any electrical device, supervision of your pet's usage should be exercised until your pet is acclimated to the product. If your pet is prone to chewing,
we strongly recommend you keep this and all other electrical devices out of its reach.
B. Installing the battery pack for the Owner unit
Connect the small plug of
the power adapter to the
pet unit and the other end to
the electrical outlet.
Only use the enclosed
Black
adapter (5.9V DC/1000mA).
D. Connecting power supply for the Owner unit
Small cross head or
Flat end screwdriver
Insert the wire tab of the
rechargeable battery pack into
the contact slot as shown above
and fit the battery pack into the
compartment.
Red
Connect the small plug of the
power adapter to the owner
unit and the other end to the
electrical outlet.
Only use the enclosed adapter
(6V DC/500mA).