ENGLISH –––––––––––––––––––––––––––––––––––––––––––––––––––––– electric shock. KTM110 f. If operating a power tool in a damp location is 110mm Tile/Marble Cutter unavoidable, use a residual current device –––––––––––––––––––––––––––––––––––––––––––––––––––––– (RCD) protected supply. Use of an RCD reduces TECHNICAL DATA the risk of electric shock. SPECIFICATION KTM110 3.
Page 4
9. Do not start the tool with the disk touching the work. 10. When switching off the tool, do not put down the tool until the disc completely stops running, nor should any external force be exerted to stop the disk.
ENGLISH Switching On And Off (Fig. E) To switch the tool on, press the on/off switch (1). • To switch the tool off, release the on/off switch.This • tool has a lock-on feature. To activate press the on/off switch and the then •...