Connections - Sharp PN-Y496 Setup Manual

Caution
• Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/disconnecting
cables. Also, read the manual of the equipment to be connected.
• Be careful not to confuse the input terminal with the output terminal when connecting cables. Accidentally reversing cables
connected to the input and output terminals may cause malfunctions and the other problems.
For power outlet
Power cord AC input terminal
(Supplied)
TIPS
• The audio input terminals used in each input mode are factory-set as follows.
Input mode
DVI-D
HDMI[PC], HDMI[AV]
D-SUB[RGB]
D-SUB[COMPONENT], D-SUB[VIDEO]
Media Player
* DVI mode in which the HDMI signal does not include an audio signal.
• The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks
of HDMI Licensing LLC, in the United States and other countries.
• Adobe, Acrobat, and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United
States and/or other countries.
• SD and SDHC Logos are trademarks or registered trademarks of SD-3C, LLC in the United States, other countries or both.
• All other brand and product names are trademarks or registered trademarks of their respective holders.
6
E

Connections

13
1 2 3 4 5 6
Audio input terminal
PC audio input terminal
HDMI input terminal / PC audio input terminal*
PC audio input terminal
AV audio input terminal
USB port / SD card slot
1. Audio output terminal
7
2. RS-232C output terminal
3. PC audio input terminal
8
4. AV audio input terminal
5. RS-232C input terminal
9
6. LAN terminal
7. SD card slot
10
8. D-sub input terminal
9. DVI-D output terminal
11
10. DVI-D input terminal
11. HDMI input terminal
12
12. USB port
13. Power supply terminal