Choose Sound - Philips HTB3510 User Manual

What you need
• A Karaoke microphone.
• Karaoke discs.
Note
•
To prevent loud feedback or unexpected noise, turn
the microphone volume to the minimum before you
connect the microphone to your home theater.
Play karaoke music
1
While playing a karaoke disc, press
OPTIONS.
» The options menu is displayed.
2
Press the Navigation buttons to select
[Karaoke], and then press OK.
» The karaoke setup menu is displayed.
3
Press the Navigation buttons (up/down)
and OK to change the following settings:
[Microphone]: Turn the microphone
•
on or off.
[Microphone volume]: Change the
•
microphone volume.
[Echo]: Change the echo level.
•
[Key]: Change the pitch to match your
•
voice.
[Vocal support]: Select an audio mode,
•
or turn the vocal on or off.

Choose sound

This section helps you choose the ideal sound
for your video or music.
1
Press .
2
Press the Navigation buttons (left/right) to
access the sound options on the display.
Sound Description
options
[Surround]
Select surround sound or stereo
sound.
[Sound]
Select a sound mode.
Sound Description
options
[Audio
Delay the audio to match the
sync] video.
[Auto
Reduce sudden changes in
volume]
volume, for example, during TV
commercials.
3
Select an option, and then press OK.
4
Press BACK to exit.
• If you do not press a button within a
minute, the menu exits automatically.
Surround sound mode
Experience an immersive audio experience with
surround sound modes.
1
Press .
2
Select [Surround], and then press OK.
3
Press the Navigation buttons (up/down)
to select a setting from your display:
[Auto]: Surround sound based on the
•
audio stream.
[Multi-channel]: Traditional 5.1
•
channel for a more relaxing cinematic
experience.
[Stereo]: Two-channel stereo sound.
•
Ideal for listening to music.
4
Press OK to confirm.
Sound mode
Select predefined sound modes to suit your
video or music.
1
Make sure that audio post processing is
enabled at the speakers (see 'Speaker
settings' on page 26).
2
Press .
3
Select [Sound], and then press OK.
4
Press the Navigation buttons (up/down)
to select a setting on the display:
• [Auto]: Automatically select a sound
setting based on the sound stream.
EN
23