Related Manuals for Siemens WM14YH89GB
Summary of Contents for Siemens WM14YH89GB
- Page 1 Washing machine WM14YH89GB siemens-home.bsh-group.com/welcome Register your product online www.devicemanuals.eu/...
- Page 2 Your new washing machine Display rules : Warning! You have chosen a Siemens washing machine. This combination of symbol and signal word indicates a possibly dangerous Please take a few minutes to read and situation. Not heeding the warning can become familiar with the advantages of cause death or injuries.
-
Page 3: Table Of Contents
Contents e n I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Intended use. - Page 4 Changing the programme ..45 Faults and what to do about Cancel the programme ..45 them..... . 62 Programme end during rinse hold .
-
Page 5: Intended Use
Intended use Intended use This appliance is intended for private ■ I n t e n d e d u s e domestic use only. Do not install or operate this ■ appliance anywhere that is liable to experience frost and/or outdoor conditions. -
Page 6: Safety Instructions
Safety instructions Do not allow children to Safety instructions ■ clean or maintain this appliance unsupervised. T he following safety information Keep children under 3 years S a f e t y i n s t r u c t i o n s and warnings are provided to ■... -
Page 7: Installation
Safety instructions Warning Installation Risk of suffocation! Warning If allowed to play with the Risk of electric shock/fire/ packaging/plastic film or material damage/damage to packing components, children the appliance! may become caught in these or If the appliance is not installed pull them over their heads and properly, this may lead to a suffocate. - Page 8 Safety instructions If using a residual current Warning ■ circuit breaker, only use one Risk of injury/material that bears the following damage/damage to the mark: z. The presence of appliance! this mark is the only way to The appliance may vibrate or ■...
- Page 9 Safety instructions If the water hoses are altered Warning ■ or damaged, this may result Risk of injury! in material damage or The appliance is very heavy. ■ damage to the appliance. Lifting it may result in injury. The water hoses must not be Do not lift the appliance on kinked, crushed, altered or your own.
-
Page 10: Operation
Safety instructions If you reach into the drum Operation ■ while it is still rotating, you Warning risk injuring your hands. Risk of explosions/fire! Wait until the drum has Laundry that has been stopped rotating. pretreated with cleaning agents Warning that contain solvents, e.g. -
Page 11: Cleaning/Maintenance
Safety instructions Never take hold of the mains Caution! ■ plug with wet hands. Material damage/damage to When removing the mains the appliance ■ plug from the socket, always If the amount of laundry in ■ take hold of the plug itself the appliance exceeds its and never the mains cable, maximum load capacity, it... - Page 12 Safety instructions Warning Risk of injury/material damage/damage to the appliance! The use of spare parts and accessories supplied by other brands is dangerous and may result in injury, material damage or damage to the appliance. For safety reasons, use genuine spare parts and accessories only.
-
Page 13: Environmental Protection
Environmental protection water consumption in the selected Environmental programmes. The more display segments are protection visible, the higher the respective consumption. P ackaging/used appliance This enables you to compare the E n v i r o n m e n t a l p r o t e c t i o n consumption levels of the different Dispose of packaging in an programmes when choosing your... -
Page 14: Positioning And Connecting
Positioning and connecting ( Mains cable Positioning and 0 Bag: connecting Installation and operating ■ instructions I ncluded with the appliance Customer services location ■ P o s i t i o n i n g a n d c o n n e c t i n g directory* Check the machine for transport Note:... -
Page 15: Safety Instructions
Positioning and connecting Safety instructions Installation surface The washing machine be stable Warning Note: so that it does not move around. Risk of injury! The installation surface must be firm The washing machine is very heavy. ■ ■ and level. Be careful when lifting/transporting Soft floors/floor coverings are not the washing machine. -
Page 16: Installing The Appliance In A Kitchenette
Positioning and connecting Installing the appliance in a Take the hoses out of the holders. kitchenette Warning Danger of death! There is a risk of electric shock if you touch live components. Do not remove the appliance covering plate. Unscrew and remove all four transportation securing bolts with a Notes wrench (WAF 13). -
Page 17: Hose And Cable Lengths
Positioning and connecting Hose and cable lengths Left-hand connection ■ Right-hand connection ■ The following are available from Tip: specialist dealers/customer services: Extension for Aqua-Stop and cold ■ water supply hose (approx. 2.50 m); order no. WM Z2380, WZ 10130, CZ 11350, Z 7070X0 A longer supply hose (approx. -
Page 18: Water Inlet
Positioning and connecting Water inlet When the tap is open, the water flow rate is at least 8 l/min. Warning If the water pressure is higher than this, Danger of death! a pressure-reducing valve must be There is a risk of electric shock if you installed. -
Page 19: Water Outlet
Positioning and connecting Water outlet Connection Drainage into a washbasin Warning ■ Risk of scalding! When you are washing at high temperatures, there is a risk of scalding if you come into contact with hot water (e.g. when draining hot water into a washbasin). -
Page 20: Levelling
Positioning and connecting Levelling Align the appliance using a spirit level. Incorrect alignment may result in loud noises, vibrations and machine "movement". Loosen the lock nuts using a WAF17 spanner, by turning it in a clockwise direction. Check the alignment of the washing machine with a spirit level, and adjust it if necessary. -
Page 21: Electrical Connection
Positioning and connecting Electrical connection The mains plug can be accessed at ■ all times. If this is not possible, in order to comply with the relevant Warning safety regulations, a switch (2-pole Danger of death! switch-off) must be built into the There is a risk of electric shock if you permanent installation in accordance touch live components. -
Page 22: Before Washing For The First Time
Positioning and connecting Before washing for the first time The washing machine was thoroughly tested before leaving the factory. To remove any water that may be left over from the test, run the first wash cycle without any laundry. Notes The washing machine must be ■... -
Page 23: Transportation
Positioning and connecting Transportation E.g. when moving house Caution! Risk of damage to the appliance caused by detergent/fabric softener leaking from the dispensers. Leaking detergent/fabric softener can Before switching on the appliance prevent the appliance from working again: correctly, e.g. due to damage to the Notes electronics. -
Page 24: Main Points In Brief
Main points in brief Main points in brief M a i n p o i n t s i n b r i e f Plug into the mains. Open the washing Sort the laundry. To switch on, press Turn on the tap. machine door. -
Page 25: Getting To Know The Appliance
Getting to know the appliance Getting to know the appliance W ashing machine G e t t i n g t o k n o w t h e a p p l i a n c e Service flap Detergent drawer with illuminated displays for the i-Dos dispenser on the drawer handle... -
Page 26: Control Panel
Getting to know the appliance Control panel Buttons Basic Settings 3 sec. Main switch for changing the appliance To switch the appliance on/off: settings, e.g. button signals, Press the # button. an overview of all selectable Programme selector settings that can be selected For selecting a programme. -
Page 27: Display Panel
Getting to know the appliance The Remote Start } button Display panel releases the appliance so that the programme can be started Main menu after selecting the remotely via the programme Home Connect app. Remote e.g. Easy-Care start remains enabled for 24 hours after it has been The arrows on the display panel activated. - Page 28 Getting to know the appliance are active immediately and are displayed on the display panel. To change, select the button under the programme highlighted in black and change the programme. Wait or go back to the main menu by pressing the Options × button. Use the i-Dos button to select the dispenser and the dosage quantity Basic Settings 3 sec.
-
Page 29: Laundry
Laundry Some examples of soiling levels can Laundry be found on ~ Page 30 – Light: Do not prewash, select the P repare the laundry speedPerfect ( setting if L a u n d r y necessary Caution! – Normal Damage to the appliance/fabrics –... -
Page 30: Detergent
Detergent Saving energy and detergent Detergent For light and normal soiling, you can C orrect selection of detergent save energy (lower washing D e t e r g e n t temperature) and detergent. The care label is crucial for selecting the correct detergent, temperature and Saving Soiling/note... -
Page 31: Overview Of Programmes
Overview of programmes Overview of programmes P rogrammes on the programme selector O v e r v i e w o f p r o g r a m m e s Programme/type of laundry/instructions Settings Name of the programme Max. - Page 32 Overview of programmes Programme/type of laundry/instructions Settings Easy-Care Max. 4 kg Textiles made of synthetic materials or blended fabrics ¯ - 60 °C 0-1200** rpm ¦, (, ã, !, l, Ã, æ, õ, $, ç Detergent è, fabric softener è Mixed Fabrics Max.
- Page 33 Overview of programmes Programme/type of laundry/instructions Settings Rapid 15’/30‘ * Max. 2/3,5 kg Extra-short programme of approx. 15/30 minutes, suitable for small ¯ - 40 °C items of lightly soiled laundry 0-1200** rpm Note: . The Rapid 15’ programme is run for the speedPerfect ( (, $, ç...
- Page 34 Overview of programmes Programme/type of laundry/instructions Settings Shirts Max. 2 kg Non-iron shirts or blouses made of cotton, linen, synthetic fibres or ¯ - 60 °C blended fabrics 0-800** rpm Notes ¦, (, ã, !, l, Ã, æ, õ, Shirts/blouses are only given a short spin on the ■...
- Page 35 Overview of programmes Programme/type of laundry/instructions Settings Rinse * Rinse Plus with spin 0-1600** rpm Ã, l, $, æ Detergent -, fabric softener è Spin * Extra spin with selectable speed 0-1600** rpm æ Detergent -, fabric softener - Drain * For the rinsing water, e.g.
-
Page 36: Starching
Overview of programmes Programme/type of laundry/instructions Settings Sportswear * Max. 2 kg Sportswear and leisurewear made from microfibre fabrics ¯-40 °C Notes 0-800** rpm Laundry must not be treated with fabric softener. ■ ¦, (, ã, !, l, Ã, æ, õ, Before washing, clean the detergent drawer thoroughly (manual ■... -
Page 37: Programme Default Settings
Programme default settings Finish in Programme default The programme duration is shown after settings selecting the programme. Before starting the programme, you T he programme default settings are P r o g r a m m e d e f a u l t s e t t i n g s displayed in the main menu after can preselect the programme end in hourly increments (h = hour) up to a... -
Page 38: I-Dos Settings
Programme default settings i-Dos settings i-Dos i for fabric softener Dosage strengths Your washing machine has an intelligent dosing system for liquid detergent and High: high level of softness ª fabric softener (or detergent when using Medium: medium level of softness ©... -
Page 39: Additional Programme Settings/Options (* Depending On The Model)
Additional programme settings/options Prewash * Additional programme settings/options Settings that can be selected: (* depending on the on – off model) For heavily soiled laundry. T he settings/options that are available Notes A d d i t i o n a l p r o g r a m m e s e t t i n g s / o p t i o n s depend on the model. -
Page 40: Less Ironing
Additional programme settings/options Less Ironing * Rinse Hold * (æ) Settings that can be selected: Settings that can be selected: on – off on – off Reduces creasing thanks to a special The washing remains in the water after spin sequence followed by fluffing and the last rinse cycle. -
Page 41: Stains
Additional programme settings/options Stains * The treatment of two stains explained in the following example: (ã) Blood In total, there are 16 different types of Blood is first “dissolved” in cold water, stain to choose from. then the selected wash programme starts. -
Page 42: Operating The Appliance
Press the # button. The appliance is settings for each washing cycle. switched on. To do this, repeatedly press the The Siemens logo appears on the corresponding button until the required display and all indicator lamps light up. setting is displayed. ~ Page 31 The Cotton programme set at the factory is then always displayed. -
Page 43: Select Additional Programme
Additional programme settings/options load. ~ Page 39 Wait until the Siemens logo no longer ■ appears before adding laundry. The load screen appears when the Placing laundry into the drum ■... -
Page 44: Start The Programme
Operating the appliance Start the programme Note: Foam detection If Foam has been detected also Make sure that no items of laundry are appears on the display panel, the trapped between the door and the washing machine has detected too rubber seal, and close the door. -
Page 45: Adding Laundry
Operating the appliance Adding laundry Cancel the programme After starting the programme, you can For programmes at high temperatures: add or remove laundry if necessary. Press the Ü button. To cool down laundry: Select Rinse. Press the Ü button to do this. Press the Ü... -
Page 46: Removing Laundry/Switching Off The Appliance
Operating the appliance Removing laundry/switching off the appliance Open the loading door and remove the laundry. Follow the information on the display panel. Press the # button. The appliance is switched off. Turn off the tap. Not required for AquaStop Note: models. -
Page 47: Intelligent Dosing System
Intelligent dosing system Notes Intelligent dosing Only use easy-pour liquid products ■ system that the manufacturer recommends adding to the detergent drawer. Do not mix different liquid I ntelligent dosing system in ■ detergents. If changing your liquid I n t e l l i g e n t d o s i n g s y s t e m the detergent drawer detergent (type, manufacturer, etc.), empty the dispenser completely and... -
Page 48: Everyday Use
Intelligent dosing system When the appliance is switched on, the The dosage strength has been preset to following indicates that the detergent low (lightly soiled laundry) for drawer is closed completely: detergent ô and to medium (medium level of softness) for fabric softener i. It The corresponding illuminated ■... -
Page 49: Base Dosage
Intelligent dosing system Base dosage Set the basic detergent dosage according to the detergent's packaging label. Take your water hardness into The basic dosages are: consideration when doing so. For detergents – based on the Select the basic fabric softener dosage ■... -
Page 50: Dispenser Content For I-Dos Iiô
Intelligent dosing system Dispenser content for Warning Eye/skin irritation! i-Dos iIô Detergent and care products may spray Instead of fabric softener, a second out if the detergent drawer is opened liquid detergent can be used in the i- while the appliance is in operation. Dos iIô... -
Page 51: Home Connect
Home Connect Connect your appliance to your Dosing and adding detergent: home network automatically or Pull out the detergent drawer. manually (you only need to do this the first time). Connect your appliance to the Home Connect app. You can find information about the app on our Home Connect website www.home-connect.com Home Connect services are not... -
Page 52: Calling Up The Home Connect Menu
Home Connect Calling up the Home Connect Connecting to your home network automatically menu Step 2.1 In the Home Connect menu, you can Ensure that you are in the Home create and view network connections, Connect menu. ~ Page 52 reset network settings, activate/ deactivate Wi-Fi and find other Home Press Connect. - Page 53 Home Connect Connecting to your home network manually Step 2.2 Ensure that you are in the Home Connect menu. ~ Page 52 Make sure that you have opened the Home Connect app and are logged in. Press Man. network log-in. Press Connect.
-
Page 54: Activating/Deactivating Wi-Fi
Home Connect If Wi-Fi is switched off on the ■ appliance, it is not possible to use the Home Connect app to start or control the appliance remotely. If Wi-Fi is switched off and your ■ appliance was previously connected to your home network, this connection will be re-established automatically when Wi-Fi is switched... -
Page 55: Updating The Software
A detailed RED Declaration of several minutes. Do not switch the Conformity can be found online at appliance off while updates are being www.siemens-home.bsh-group.com installed. among the additional documents on the product page for your appliance. If no software update is available, Note: Not available appears in the display. -
Page 56: Appliance Settings
Appliance settings Basic dosage: ■ Appliance settings i-Dos ô Basic 10 ml – 200 ml Y ou can change the following appliance Set the basic dosage in accordance A p p l i a n c e s e t t i n g s settings: with the recommendation of the detergent manufacturer. -
Page 57: Sensors
Sensors Dosing recommendation Sensors The dosing recommendation indicates a A utomatic load sensing recommended detergent dosage as a S e n s o r s percentage, depending on the selected Depending on the type of fabric and programme and the detected load. The load, the automatic load sensing indicated % refers to the dosing function optimally adjusts the water... -
Page 58: Cleaning And Maintenance
Cleaning and maintenance Machine housing/control Cleaning and panel maintenance Wipe the housing and the control ■ Warning panel with a soft, damp cloth. C l e a n i n g a n d m a i n t e n a n c e Remove the detergent residue Danger of death! ■... -
Page 59: I-Dos Detergent Draw And Its Housing
Cleaning and maintenance i-Dos detergent draw and its The detergent drawer can be removed completely to allow you to housing clean to dispensers after you have emptied them. Emptying the dispensers: a) Empty the dispensers before The dispensers have emptying removing the drawer. -
Page 60: The Drain Pump Is Blocked, Emergency Draining
Cleaning and maintenance – Protect the rear drawer connector Turn off the water tap so that no against water, detergent or fabric- more water can flow in and has to be softener residue; if necessary, drained via the drain pump. clean the outer surfaces with a Switch off the appliance. -
Page 61: The Drain Hose At The Siphon Is Blocked
Cleaning and maintenance Put the service flap back on, lock it Filter in the water supply into place and close it. blocked First, reduce the water pressure in the supply hose: Turn off the tap. Select any programme (except Rinse/Spin/Empty). Press the Ü... -
Page 62: Faults And What To Do About Them
Faults and what to do about them. Faults and what to do about them. E mergency release F a u l t s a n d w h a t t o d o a b o u t t h e m . E.g. -
Page 63: Information On The Display Panel
Faults and what to do about them. Information on the display panel Display Cause/remedy Top up the i-Dos iIô, The i-Dos dispensers are below the minimum fill level; top up ~ Page 47. ô container i-Dos iIô, i-Dos ô Set i-Dos iIô, i-Dos ô to Off. error;... -
Page 64: Faults And What To Do About Them
Faults and what to do about them. Display Cause/remedy Remote start selected. Off: Wi-Fi is switched off and the appliance is not connected to your home network. Flashing: The appliance is trying to connect to your home network. Lit: Wi-Fi is switched on and the appliance is connected to your home network. Other displays Switch off the appliance, wait for five seconds and then switch it on again. - Page 65 Faults and what to do about them. Faults Cause/remedy Water is not visible in the Not a fault – the water is below the visible area. drum. The spin result is not Not a fault – the unbalanced load detection system has interrupted the ■...
- Page 66 Faults and what to do about them. Faults Cause/remedy Loud noises, vibrations Is the appliance level? Level the appliance. ~ Page 20 ■ and machine "wandering" Are the appliance's feet secured? Secure the appliance's feet. ■ during the spin cycle. ~ Page 20 Have the transport locks been removed? Remove the transport locks.
-
Page 67: After-Sales Service
After-sales service After-sales service I f you cannot rectify a fault yourself, A f t e r - s a l e s s e r v i c e contact customer services. ~ Cover page We will always find an appropriate solution in order to avoid unnecessary visits by engineers. -
Page 68: Consumption Rates
Consumption rates Consumption rates E nergy and water consumption, programme duration and C o n s u m p t i o n r a t e s residual moisture for the main washing programmes (approximate values) Programme Load Energy Water Programme consumption*... -
Page 69: Efficiency Test Programmes For Cotton Fabrics
Technical data Efficiency test programmes for cotton fabrics The following programmes (standard programmes, indicated by ü) are suitable for cleaning normally soiled cotton fabrics and are the most efficient with respect to combined energy and water consumption. Standard programmes for cottons in accordance with Regulation (EU) no. 1015/2010 Programme + temperature Load Approximate programme... -
Page 70: Aqua-Stop Warranty
Aqua-Stop warranty Aqua-Stop warranty O nly for appliances with Aqua-Stop A q u a - S t o p w a r r a n t y In addition to warranty claims against the vendor based on the purchase agreement and to our appliance warranty, we will provide compensation under the following conditions: If water damage is caused due to a... - Page 71 www.devicemanuals.eu/...
- Page 72 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY siemens-home.bsh-group.com *9001345512* 9001345512 (9712) www.devicemanuals.eu/...