Charger Power adapter Handset Quick start guide Guarantee Caution • Use only the supplied batteries and power adapter. Get started Connect the charger Power Power adapter socket Extra handset charger Connect each end of the power adapter to: • the DC input jack at the bottom of the extra handset charger.
Page 3
Configure your handset 1 The batteries are pre-installed in the handset. Pull the battery tape off from the battery door before charging. 2 When using your phone for the first time, you see a welcome message (country dependent). 3 Select your country, then press [OK] to confirm. 4 Set the date and time. • If the time is in 12-hour format, [PM].
Charge your handset Charge 8 hours Place the handset on the charger to charge the handset. When the handset is placed correctly on the charger, you hear a docking sound. » The handset starts charging. Note Charge the batteries for 8 hours before first use. Check the battery level When the handset is off the base station/charger, the bars indicate the battery level (full, medium and low). When the handset is on the base station/charger, the bars flash until charging completes.
Register the handsets You can register additional handsets to the base station. The base station can register up to 5 handsets. Auto registration 1 Place the unregistered handset on the base station. » The handset detects the base station and start to register automatically.