LG OLED48A2AUA Owner's Manual

LG OLED48A2AUA Owner's Manual

Hide thumbs Also See for OLED48A2AUA:
Table of Contents

Advertisement

Available languages

Available languages

OWNER'S MANUAL
Safety and Reference
Please read this manual carefully before
operating your set and retain it for
future reference.
OLED48A2AUA
OLED55B2PUA
OLED48A2PUA
OLED65B2PUA
OLED55A2AUA
OLED77B2PUA
OLED55A2PUA
OLED65A2AUA
OLED65A2PUA
OLED77A2AUA
OLED77A2PUA
The model and serial number of the product are
located on the back and on one side of the product.
Record them below in case you ever need service.
Model
Serial No.
*MFL718561332202REV00*
OLED42C2AUA
OLED42C2PUA
OLED48C2AUA
OLED48C2PUA
OLED55C2AUA
OLED55C2PUA
OLED65C2AUA
OLED65C2PUA
OLED77C2AUA
OLED77C2PUA
OLED83C2AUA
OLED83C2PUA
www.lg.com
Printed in Korea
Copyright © 2022 LG Electronics Inc.
All Rights Reserved.
Supplier`s Declaration of
Conformity
Trade Name
LG
Responsible
LG Electronics USA,
Party
Inc.
Address
111 Sylvan Avenue,
North Building,
Englewood Cliffs,
NJ 07632
E-mail
lg.environmental@
lge.com
LG Customer Information Center
For inquires or comments, visit www.
lg.com or call;
1-888-542-2623 CANADA
USA, Consumer
1-800-243-0000
User
USA, Commercial
1-888-865-3026
User
Register your product Online!
www.lg.com

Advertisement

Table of Contents
loading

Summary of Contents for LG OLED48A2AUA

  • Page 1 Printed in Korea Copyright © 2022 LG Electronics Inc. OWNER’S MANUAL All Rights Reserved. Safety and Reference Please read this manual carefully before operating your set and retain it for future reference. OLED48A2AUA OLED55B2PUA OLED42C2AUA OLED48A2PUA OLED65B2PUA OLED42C2PUA OLED55A2AUA...
  • Page 2: External Control Device Setup

    OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com P/NO : MFL71445401 (1901-REV00)
  • Page 3: Key Codes

    KEY CODES KEY CODES • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) CH +, PR + R/C Button List R/C Button CH -, PR - R/C Button Exit R/C Button Volume + R/C Button PIP(AD) R/C Button...
  • Page 4 (TV) (PC) • LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial(RS-232C) RS-232C IN converter which is not made nor provided by LG. (CONTROL & SERVICE) (PC) (TV) • It can be purchased from computer stores that carry accessories for IT support professionals.
  • Page 5 EXTERNAL CONTROL DEVICE SETUP (TV) (PC) (TV) (PC) Phone jack Type RS-232C IN • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and (CONTROL & SERVICE) (PC) (TV) the TV, which is specified in the manual. RS-232C IN (CONTROL &...
  • Page 6 EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Stop bit : 1 bit • Data length : 8 bits • Communication code : ASCII code • Parity : None • Use a crossed (reverse) cable. Command reference list (Depending on model) DATA...
  • Page 7 EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99.
  • Page 8 EXTERNAL CONTROL DEVICE SETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) Ack [d][ ][Set ID][ ][OK/NG][Data][x] ► To control Power *On or Off of the set. * In case of video mute on only, TV will display On Transmission[k][a][ ][Set ID][ ][Data][Cr] Screen Display(OSD).
  • Page 9 EXTERNAL CONTROL DEVICE SETUP 08. Color/Colour (Command: k i) 13. Treble (Command: k r) ► To adjust the screen Color(Colour). ► To adjust treble. You can also adjust colour in the PICTURE menu. You can also adjust in the AUDIO menu. Transmission [k][i][ ][Set ID][ ][Data][Cr] Transmission [k][r][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64...
  • Page 10 EXTERNAL CONTROL DEVICE SETUP 18. Equalizer (Command : j v) * Analog Antenna/Cable ► Adjust EQ of the set. [Data 00][Data 01] Channel Data Transmission [j][v][ ][Set ID][ ][Data][Cr] Data 00 : High byte channel data Data 01 : Low byte channel data - 00 00 ~ 00 C7 (Decimal : 0 ~ 199) Data 02 : Input Source (Analog) - 00 : Antenna TV (ATV)
  • Page 11 EXTERNAL CONTROL DEVICE SETUP * Analog Antenna/Cable 2. Tune to the digital antenna (ATSC) channel 30-3. Set ID = All = 00 Data 00 : Physical Channel Number Data 00 = Don’t know Physical = 00 - Antenna (ATV) : 02~45 (Decimal: 2 ~ 69) Data 01 &...
  • Page 12 11 11 EXTERNAL CONTROL DEVICE SETUP 24. Input select (Command: x b) 2. Tune to the BS (ISDB-BS) channel 30. Set ID = All = 00 (Main Picture Input) Data 00 = Don’t know Physical = 00 ► To select input source for main picture. Data 01 &...
  • Page 13 EXTERNAL CONTROL DEVICE SETUP * [Data 02], [Data 03] functions depend on model 3) When [Data 00] is 06, 07 and signal. 00 : Off 01 : On * If [Data 00] is 00 (3D On), [Data 03] has no meaning.
  • Page 15: Important Safety Instruction

    By using this product, you agree that all disputes between you and LG arising out of or relating in any way to this product (including but not limited to warranty disputes) shall be resolved exclusively through binding arbitration on an individual basis. The terms of the arbitration agreement (including details on the procedure for resolving disputes) is available at www.lg.com/us/arbitration (USA) or www.lg.com/ca_en/arbitration (Canada).
  • Page 16 Warning! Safety instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
  • Page 17: Installation

    • Use only an authorized attachments / accessories approved by LG • Do not press strongly upon the panel with a hand or a sharp object such Electronics. Otherwise, this may result in fire, electric shock, malfunction, or product damage.
  • Page 18: Mounting To The Wall

    We recommend that you use an LG brand wall mount. The LG wall mount is easy to adjust or to connect the cables. When you do not use LG’s wall mount bracket, use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices.
  • Page 19 Starting TV Turning on the TV <B type> You can simply operate the TV functions, using the button. Power On (Press) Power Off (Press and hold) <A type> Power On (Press) Power Off (Press and Hold) Volume Control Menu Control (Press Menu Selection (Press and Hold Channels Control 1) All running apps will close.
  • Page 20: External Devices

    To obtain the RS-232C external control setup information, please visit www. • For an optimal connection, HDMI cables and USB devices should have lg.com. Download and read the manual, (Depending upon model). bezels less than 10 mm (0.39 inches) thick and 18 mm (0.7 inches) width.
  • Page 21: Specifications

    Specifications Product specifications may be changed without prior notice due to upgrade of product functions. Estimated yearly energy consumption indicated on the FTC label is measured in accordance with the Test Procedures for Television Sets (USA only). The actual energy consumption depends on the usage environment (The content watched, TV settings, etc.). •...
  • Page 22: Product Information

    5,150 to 5,725 MHz 15 dBm LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of 5,725 to 5,850 MHz 15 dBm...
  • Page 23: Troubleshooting

    Troubleshooting Cannot control the TV with • Check if anything such as tape has been placed over the receiver. the remote control. • Check if there is any obstacle between the product and the remote control. • Replace the batteries with new fresh ones. No image display and no •...
  • Page 24 Precautions for Protecting the OLED TV Screen Running [Pixel Cleaning] to Protect the Unlike regular LED/LCDs, OLED TVs produce images that emit light for each pixel, achieving a perfect black color and delivering clear images without OLED TV Screen blurring. The OLED TV is equipped with a pixel cleaning feature to check the status of Due to the nature of the organic materials used to achieve high-resolution the screen by itself and prevent image retention.
  • Page 25 Regulatory...
  • Page 26 NOTE TO CABLE/TV INSTALLER (For USA and Canada) This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.
  • Page 28 Copyright © 2022 LG Electronics inc. MANUEL D’UTILISATION Tous droits réservés. Sécurité et références Veuillez lire ce manuel attentivement avant d’utiliser l’appareil et conservez- le pour pouvoir vous y reporter ultérieurement. OLED48A2AUA OLED55B2PUA OLED42C2AUA OLED48A2PUA OLED65B2PUA OLED42C2PUA OLED55A2AUA OLED77B2PUA...
  • Page 29: Directives De Sécurité Importantes

    En utilisant ce produit, vous acceptez que tout différend entre vous et LG relativement à ce produit ou découlant de ce dernier de quelque manière que ce soit (y compris, sans toutefois s’y limiter, les différends concernant la garantie) se règle exclusivement par arbitrage exécutoire au cas par cas. Les modalités de l’...
  • Page 30 Avertissements! Directives de sécurité MISE EN GARDE RISQUE DE DÉCHARGE ÉLECTRIQUE NE PAS OUVRIR MISE EN GARDE : AFIN DE RÉDUIRE LE RISQUE DE DÉCHARGE ÉLECTRIQUE, NE RETIREZ PAS LE COUVERCLE (OU LE PANNEAU ARRIÈRE). AUCUNE PIÈCE POUVANT ÊTRE RÉPARÉE PAR L’UTILISATEUR NE SE TROUVE À L’INTÉRIEUR DE L’APPAREIL. CONFIEZ L’ENTRETIEN DE CET APPAREIL À DU PERSONNEL QUALIFIÉ. Ce symbole a pour fonction d’alerter l’utilisateur de la présence d’une tension dangereuse non isolée à...
  • Page 31: Soulèvement Et Déplacement Du Téléviseur

    • Ne tentez en aucun cas de réaliser des modifications sur cet appareil • Conservez le matériel d’ e mballage anti-humidité ou l’ e mballage en sans avoir obtenu l’autorisation écrite de LG Electronics. Cela pourrait vinyle hors de la portée des enfants.
  • Page 32: Fixation Du Téléviseur Au Mur

    Nous vous recommandons être difficile à soulever si un nombre excessif de câbles y sont branchés. d’utiliser un support de fixation murale de marque LG. Le support de fixation En pareil cas, retirez le couvercle de l’ e ntrée AV avant l’utilisation.
  • Page 33: Mise Sous Tension Du Téléviseur

    Démarrage du téléviseur Mise sous tension du téléviseur <Type B> Vous pouvez simplement utiliser les fonctions du téléviseur à l’aide du Mise sous tension (appuyez) bouton. Mise hors tension (maintenez enfoncé) <Type A> Mise sous tension (appuyez) Réglage du volume Mise hors tension (maintenez enfoncé) Commande du menu (appuyez Sélection du menu (maintenez enfoncé...
  • Page 34: Périphériques Externes

    Pour obtenir les instructions de configuration de la télécommande et des dispositifs USB devraient avoir un rebord de moins de 10 mm externe RS-232C, rendez-vous au www.lg.com. Téléchargez et lisez le manuel. (0,39 po) d’ é paisseur et de moins de 18 mm (0,7 po) de largeur.
  • Page 35: Caractéristiques Techniques

    Caractéristiques techniques Les caractéristiques techniques sont susceptibles d’ ê tre modifiées sans préavis en raison de la mise à niveau des fonctions du produit. La consommation d’ é nergie annuelle estimée indiquée sur l’ é tiquette FTC est mesurée conformément aux procédures de test pour les téléviseurs (États-Unis seulement).
  • Page 36: Renseignements Sur Le Produit

    15 dBm pertinents peuvent aussi être consultés. Bluetooth LG Electronics mettra également à votre disposition le code source libre sur CD-ROM pour un prix couvrant le coût de la distribution (coût du support, de Gamme de fréquences Puissance de sortie (maximale) l’...
  • Page 37: Dépannage

    Dépannage La télécommande ne • Assurez-vous que rien n’a été placé sur le récepteur (p. ex. ruban adhésif). fonctionne pas. • Vérifiez qu’aucun obstacle n’ e mpêche la communication entre l’appareil et la télécommande. • Remplacez les piles par des piles neuves. Le téléviseur ne produit •...
  • Page 38 Mesures de protection de l’écran de téléviseur OLED Exécution de la fonctionnalité Contrairement aux téléviseurs à DEL ou ACL ordinaires, les téléviseurs OLED contiennent des pixels qui émettent leur propre lumière, ce qui permet [Nettoyage des pixels] pour protéger d’ o btenir des noirs parfaits et des images nettes et sans flou. l’écran d’un téléviseur OLED En raison de la nature des matériaux organiques utilisés pour obtenir une qualité...
  • Page 39: Avis D'industrie Canada

    Réglementation Renseignements relatifs à la réglementation de la FCC (Pour les États-Unis) Cet appareil a été testé et jugé conforme aux limites relatives aux appareils numériques de catégorie B imposées par le paragraphe 15 de la réglementation de la FCC. Ces limites sont établies afin d’ o ffrir une protection raisonnable contre les interférences nuisibles dans une résidence. Cet équipement génère, utilise et peut diffuser de l’...
  • Page 40 Exigences du CNR-247 (Pour le Canada) [Pour les produits ayant la fonction sans fil utilisant des bandes de fréquences de 5 GHz] (1) Les dispositifs fonctionnant dans la bande de 5 150 à 5 250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;...

Table of Contents