Operating Basics; Auxiliary Features - Kenwood TK-3202-3 Instruction Manual

OPERATING BASICS

Switching Power ON/OFF
**
Turn the Power switch/ Volume control clockwise to switch the transceiver ON.
Turn the Power switch/ Volume control counterclockwise to switch the transceiver OFF.
Adjusting the Volume
**
Rotate the Power switch/ Volume control to adjust the volume.
Selecting a Channel
**
Rotate the Channel selector to select a channel.
Clockwise increases the channel number and counterclockwise decreases it.
Making a Call
**
1 Select the desired channel.
2 Press and hold the PTT switch, then speak into the microphone in your normal voice.
3 For best results, hold the microphone approximately 3 to 4 cm (1 1/2 inches) from your lips.
4 Release the PTT switch to receive.

AUXILIARY FEATURES

Time-out Timer (TOT)
**
The TOT is used to automatically inhibit transmission after a specified time elapse. If the PTT switch is held down for longer than
specified time, the transceiver will stop transmitting and a tone will sound. Release the PTT switch, then press it again to continue
transmitting.
ATING BASICS
TK-3202-3 FCC ID:ALH36923230