ABB HT570679 Operation Manual page 125

Operation Manual / 4 Product description / A150-M.. - A155-M..
8 Dismantling and fitting
Removing the turbine casing
Screw-in depth of swivel lifting eye
If burst protection is fitted, the turbine casing can be dismantled with the
burst protection.
CAUTION
Ensure that the swivel lifting eye can be screwed in all the way.

Mark the casing position for assembly.

Figure 50: Removing the turbine casing
1. Fit swivel lifting eye (S) to the turbine casing (51000). Secure lifting gear to the swivel lift-
ing eye.
2. Loosen nuts (51007) and remove together with Verbus Ripp® washers (51003) and fas-
tening strips (51002).
3. Remove turbine casing, set it down properly in an appropriate place and secure it.
4. If present: Remove the C-ring (51105).
© Copyright 2017 ABB. All rights reserved. HZTL4032_EN
Page 95 / 120
Revision F January 2017