Contents Important Safety Your Philips Wireless HD Net Connect 5 What is in the box Overview The transmitter The receiver Installation Connect the transmitter to your computer Connect the receiver to the HDTV set Activate your Philips Wireless HD Net Connect and set up the link...
1 Important Safety This ‘bolt of lightning’ indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering. The ‘exclamation point’ calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.
Wireless HD Net Connect Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. What is in the box Note • Make sure you have all these items in the box. Contact your dealer for any missing or damaged items.
3 Overview The transmitter Front view Displays the connection status indicator of the transmitter. Connect the transmitter to power jack the computer with the USB cable. Top view INFO Displays on the HDTV the button connection status of the transmitter. HDMI IN Plug into the HDMI port of connector...
Page 7
The Philips Wireless HD Net Connect gives you a total wireless solution to enjoy the content from your computer on your HDTV. The transmitter can transmit an uncompressed video content up to 7 meters (without obstruction between the transmitter and receiver) without latency.
4 Installation Connect the transmitter to your computer Connect the transmitter to the computer using the supplied USB cable. Connect the transmitter to the HDMI port of the computer. Connect the small end of the USB cable to the POWER jack of the transmitter; Connect the receiver to the HDTV set Connect the other end of the USB cable...
5 Activate your Philips Wireless HD Net Connect and set up the link Turn on the power of your HDTV HDMI HDMI Go to the source menu under the settings menu of your HDTV. Select the HDMI input to which the receiver is connected.
The maximum transmission range is up to 7 meters without obstruction between the transmitter and receiver. • If more than one set of Philips Wireless HD Net Connect is placed in the same room, make sure that the minimum distance among each one is 2 meters. •...
6 Mount your receiver You can either mount the receiver on the wall or on the back of the HDTV. Mount your receiver on the wall Select a spot near the HDTV. Drill two holes in the wall. Make sure that the distance between the two holes is 45mm and the diameter of the hole is 5 mm.
Mount your receiver on the back of the HDTV Remove the white protective film from one of the supplied adhesive tapes. Secure the glued side of the adhesive tape and attach it to the central bottom area of the receiver. Select a flat location on the rear side of the HDTV.
One of Philips’ leading Business Principles is to take all necessary health and safety measures for our products, to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products.
Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials and old equipment. Warranty information Warranty information can be found at: www. philips.com/support...
9 Frequently asked questions The power LED on the receiver is not lit up in red in standby mode. There is no video displayed on my TV screen. f the picture quality is poor, what do I do? Make sure that there is power supply for the receiver. •...
Page 17
I cannot hear any sound or the sound is poor, what do I do? How can I connect to my computer to enable the external display? For Windows7 operation system: For Windows Vista operating system: For Windows XP operating system: •...
Page 18
For MAC operating system: How can I change the audio setting of my computer to HDMI output? For Windows7 and Vista operating system: For Windows XP operating system: MAC operating system detects the external display equipment and switches to a better resolution automatically when you plug in the display cable to MAC series.