Communication Parameters - Toshiba Tosvert RS485 Instruction Manual

7. Communication parameters

The settings of communication-related parameters can be changed from the operation panel and
the external controller (computer). Note that there are two types of parameters: parameters whose
settings take effect immediately after the setting and parameters whose settings do not take effect
until the inverter is turned back on or reset.
Com-
munica-
Title Function
tion
Number.
Baud rate
0800

(2-wire RS485)
0801  Parity (common)
Inverter number
0802

(common)
Communication
0803 time-out time

(common)
Communication
0804 time-out action

(common)
Send waiting time
0805

(2-wire RS485)
Inverter-to-inverter
0806 communication (2-

wire RS485)
Protocol selection
0807

(2-wire RS485)
Frequency point
0810

selection
0811  Point 1 setting
0812  Point 1 frequency
0813  Point 2 setting
0814  Point 2 frequency
Communication
0820 speed

(4-wire RS485)
Send waiting time
0825

(4-wire RS485)
Adjustment range
0: 9600bps
1: 19200bps
2: 38400bps
0: Non parity
1: Even parity
2: Odd parity
0-247
0:OFF
1-100s
2-wire
0 - -
1 t alarm -
2 Err5 trip -
3 - t alarm
4 t alarm t alarm
5 Err5 trip t alarm
6 - Err5 trip
7 t alarm Err5 trip
8 Err5 trip Err5 trip
0.00: Default
0.01-2.00s
0:Slave (issues a 0Hz command if some-
thing goes wrong with the master)
1:Slave (continues operation if something
goes wrong with the master)
2:Slave (trips for emergency stop if
something goes wrong with the master)
3:Master (sends a frequency command)
4:Master (sends an output frequency)
5.Master (sends a torque command)
6.Master (sends an output torque com-
mand)
0: TOSHIBA
1:MODBUS-RTU
0:Disabled
1:2-wire RS485
2:4-wire RS485
3:Communication add option
0-100%
0-Hz
0-100%
0-Hz
0: 9600bps
1: 19200bps
2: 38400bps
0.00: Normal
0.01-2.00s
40
Default
Unit
setting
- 1
- 1
1 0
1s 0
4-wire
1 8
0.01s 0.00
- 0
- 0
- 0
- 0
0.01Hz 0.0
- 100
0.01Hz 60.0
- 1
0.01s 0.00
E6581315
Valid Reference
After reset. Section 7.1
After reset. Section 7.1
Real time Section 7.2
Real time Section 7.3
Real time Section 7.3
Real time Section 7.4
After reset.
Chapter 6
After reset.
Chapter 3
Real time Section 6.1
Real time
Real time
Section 6.1
Real time
Real time
After reset. Section 7.1
Real time Section 7.4