Toshiba TLP-MT7E Owner's Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Projector
  5. TLP-MT7E
  6. Owner's manual

Toshiba TLP-MT7E Owner's Manual

3lcd projector
Hide thumbs
Table of Contents

Advertisement

Quick Links

1
CONTENTS
OWNER'S MANUAL

3LCD PROJECTOR

TLP-MT7E
23565376

Advertisement

Table of Contents
loading

Related Manuals for Toshiba TLP-MT7E

Summary of Contents for Toshiba TLP-MT7E

  • Page 1: Lcd Projector

    CONTENTS OWNER’S MANUAL 3LCD PROJECTOR TLP-MT7E 23565376...

  • Page 2: Safety Precautions

    SAFETY PRECAUTIONS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

  • Page 3: Important Precautions

    IMPORTANT PRECAUTIONS Save Original Packing Materials The original shipping carton and packing materials will come in handy if you ever have to ship your LCD projector. For maximum protection, repack the set as it was originally packed at the factory. Avoid Volatile Liquid Do not use volatile liquids, such as an insect spray, near the unit.

  • Page 4: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS OWNER’S MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard.
  • Page 5 IMPORTANT SAFETY INSTRUCTIONS (continued) 5. Heat The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. 6. Water and Moisture Do not use this product near water – for example, near a bath tub, wash bowl, kitchen sink, or laundry tub;...
  • Page 6 IMPORTANT SAFETY INSTRUCTIONS (continued) 11. Object and Liquid Entry Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short- out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
  • Page 7 IMPORTANT SAFETY INSTRUCTIONS (continued) 16. Damage Requiring Service Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a) When the power-supply cord or plug is damaged. b) If liquid has been spilled, or objects have fallen into the product.

  • Page 8: Power Supply Cord Selection

    Power supply cord selection If your line voltage is 220 to 240V, use one of the following types of cable. In Singapore, use the UK type plug cable. (The UK type plug [MP5004] of this model is approved by PSB.) Plug configuration Plug type...

  • Page 9: Table Of Contents

    Contents Before use SAFETY PRECAUTIONS ... IMPORTANT PRECAUTIONS ... IMPORTANT SAFETY INSTRUCTIONS ... Power supply cord selection ... Contents ... Names of each part on the main unit ... Names of each part on the remote control ... Loading batteries ... Remote control operation ...

  • Page 10: Names Of Each Part On The Main Unit

    Names of each part on the main unit CAUTION Openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. Control panel Air exhaust Front side...
  • Page 11 Names of each part on the main unit (continued) Control panel Top side AUTO KEYSTONE button To correct the keystone distortion of the picture automatically. AUTO SET button AUTO AUTO KEYSTONE To adjust the image of the Computer input automatically. VOL/ADJ buttons VOL/ADJ.
  • Page 12 Names of each part on the main unit (continued) CONTROL connector (RS-232C connector) To connect a computer to control the projector. AUDIO IN jack (Audio input) 21 23 (ø3.5mm stereo mini-jack) To enter audio signal from a computer or a video equipment with component video output signal output) supported or a computer.

  • Page 13: Names Of Each Part On The Remote Control

    Names of each part on the remote control INPUT button To select the input source. AUTO KEYSTONE button To correct the keystone distortion of the picture automatically. FREEZE button To freeze the picture. PIP button To display the video input image as a small size picture in the computer image display window.

  • Page 14: Loading Batteries

    Loading batteries Notes Using batteries incorrectly can cause them to leak or burst. Strictly observe the following. • Install the batteries with their + and – ends facing correctly. • Do not charge, heat, disassemble, or short the batteries or throw them into a fire. •...

  • Page 15: Remote Control Operation

    Remote control operation CONTENTS Point the remote control at the infrared remote sensor and press a button. Front side Rear side Notes • The remote control may not operate when there is sunlight or other strong light such as a fluorescent lamp shining on the remote sensor. •...

  • Page 16: Floor-Mounted Projector Placement

    Floor-mounted projector placement There are two ways to place the floor-mounted projector. Perform the “Projection mode” setting on the menu screen for the projection method. For the ceiling-mounted projector placement, refer to the page Floor-mounted front projection Viewing a picture projected on the front of the screen from a floor installation.
  • Page 17 Floor-mounted projector placement (continued) Place the projector on a steady, level surface such as a table. To obtain proper screen projected, place the projector so that the projecting light hits the screen squarely. Top view Screen Point the lens straight at the center of the screen as above. Determine the screen size projected on the screen.
  • Page 18 Floor-mounted projector placement (continued) Connect the power cord. • Insert one end in the AC IN socket on the projector. • Insert the other end in a wall outlet. Take off the lens cover. Notes • When the projector is moved from a cold location to a warm location, or when the ambient temperature in the projection room has risen suddenly, moisture may condense on the lens or the internal optical section to blur the projected pictures.

  • Page 19: Projector Placement Angle Adjustment

    Projector placement angle adjustment The tilt of the projector can be adjusted using the foot adjuster. Foot adjuster Foot adjuster release button Lift up Lift up Lower Notes • To put the foot adjuster back, hold down the foot adjuster release button and lower the front slowly. •...

  • Page 20: Ceiling-Mounted Projector Placement

    Ceiling-mounted projector placement CAUTION When a ceiling mount is required, please consult with the dealer. Ceiling-mounted front projection Viewing a picture projected on the front of the screen from a ceiling installation. Perform the “Projection mode” setting on the menu screen for the projection method. Note The relation between the projection size and the distance to the screen is the same as that of the floor-mounted projection mode Ceiling-mounted rear projection...

  • Page 21: Connecting Video Equipment

    Connecting video equipment You can project the picture from video equipment with component video output jack. Check that the power for the projector and video equipment is off before connecting the cables. CONTROL COMPONENT IN ( COMPUTER ) VIDEO IN AUDIO R - AUDIO - L VIDEO...
  • Page 22 Connecting video equipment (continued) You can project the picture from video equipment by using VIDEO IN connectors. Check that the power for the projector and video equipment is off before connecting the cables. CONTROL (Red) To AUDIO-R jack (White) To AUDIO-L jack Note The S-VIDEO connector and VIDEO jack can be used independently, but the audio input jacks are used as both the S-VIDEO and VIDEO input.

  • Page 23: Connecting A Computer

    Connecting a computer You can project the picture from the computer. Check that the power for the projector and computer is off before connecting the cables. CONTROL COMPONENT IN ( COMPUTER ) VIDEO IN AUDIO R - AUDIO - L AUDIO IN jack Audio cable (Not supplied) Notes...

  • Page 24: Projector Operation Control By A Computer

    Projector operation control by a computer You can control the projector by a computer connected with the control cable supplied. Check that the power for the projector and computer is off before connecting the cables. CONTROL Note Do not connect a cable other than the exclusive one supplied. COMPONENT IN ( COMPUTER ) VIDEO IN...

  • Page 25: Projection On The Screen

    Projection on the screen CAUTION – Do not look into the projection lens while operating the projector. Control panel Remote control (Main unit side) AUTO AUTO KEYSTONE ON / VOL/ADJ. STANDBY INPUT KEYSTONE AUTO FREEZE MUTE CALL RESIZE ENTER EXIT MENU VOL/ADJ INPUT...
  • Page 26 Projection on the screen (continued) Control panel Remote control (Main unit side) AUTO KEYSTONE ON / VOL/ADJ. STANDBY INPUT KEYSTONE AUTO FREEZE MUTE CALL RESIZE ENTER MENU VOL/ADJ MENU ON/STANDBY ENTER EXIT CT-90072 TEMP LAMP BUSY INPUT INPUT AUTO Note The types of input sources selected when the INPUT button is pressed repeatedly can be set from the menu screen.
  • Page 27 Projection on the screen (continued) Control panel (Main unit side) Remote control AUTO AUTO KEYSTONE VOL/ADJ. ON / STANDBY INPUT KEYSTONE AUTO FREEZE MUTE CALL RESIZE ENTER EXIT MENU VOL/ADJ MENU INPUT ON/STANDBY ENTER EXIT CT-90072 TEMP LAMP BUSY Adjust the picture size by turning the zooming lever.

  • Page 28: Turning The Power Off

    Turning the power off Control panel Remote control (Main unit side) AUTO AUTO KEYSTONE VOL/ADJ. ON / STANDBY INPUT KEYSTONE AUTO FREEZE MUTE CALL RESIZE ENTER EXIT MENU VOL/ADJ MENU INPUT ON/STANDBY ENTER EXIT CT-90072 TEMP LAMP BUSY ON/STANDBY STANDBY ON/STANDBY STANDBY To protect the light source lamp, the LAMP indicator blinks as long as...

  • Page 29: Correcting The Keystone Distortion

    Correcting the keystone distortion Control panel Remote control (Main unit side) AUTO AUTO KEYSTONE AUTO KEYSTONE VOL/ADJ. ON / STANDBY INPUT KEYSTONE AUTO FREEZE MUTE CALL RESIZE ENTER EXIT MENU VOL/ADJ INPUT MENU ON/STANDBY ENTER EXIT CT-90072 TEMP LAMP BUSY A picture may be expanded on the upper side if projected upward from the projector lifted up by the foot adjuster.

  • Page 30: Enlarging The Picture Size

    Enlarging the picture size Remote control ON / STANDBY INPUT KEYSTONE AUTO FREEZE MUTE CALL RESIZE RESIZE MENU VOL/ADJ / / / EXIT ENTER EXIT CT-90072 The icon appears in the resize mode. You can enlarge (resize) the picture size projected. Press RESIZE ( ) The enlargement ratio increases each time the RESIZE ( button is pressed.

  • Page 31: Cutting Off The Picture And Sound Temporarily

    Cutting off the picture and sound temporarily Remote control ON / STANDBY INPUT KEYSTONE AUTO MUTE FREEZE MUTE CALL RESIZE MENU VOL/ADJ ENTER EXIT CT-90072 The image and sound of this projector can be turned off if you wish to temporarily project the image of another projector or a OHP, etc., on the screen.

  • Page 32: Freezing The Picture

    Freezing the picture Remote control ON / STANDBY INPUT KEYSTONE AUTO FREEZE MUTE FREEZE CALL RESIZE MENU VOL/ADJ ENTER EXIT CT-90072 You can freeze the image being projected. Use this function to stop images from a video recorder to make presentations. Press FREEZE.

  • Page 33: Adjusting The Picture Automatically (Computer Input)

    Adjusting the picture automatically (Computer input) Control panel (Main unit side) Remote control AUTO AUTO KEYSTONE AUTO ON / VOL/ADJ. STANDBY INPUT KEYSTONE AUTO FREEZE MUTE CALL RESIZE ENTER EXIT MENU VOL/ADJ MENU INPUT ON/STANDBY ENTER EXIT CT-90072 TEMP LAMP BUSY You can adjust the optimum horizontal position, vertical position, sampling phase and sampling frequency for projecting computer’s signals at the touch of a button.

  • Page 34: Displaying Pip Sub-Pictures

    Displaying PIP Sub-pictures Remote control ON / STANDBY INPUT KEYSTONE AUTO FREEZE MUTE CALL RESIZE MENU VOL/ADJ ENTER EXIT CT-90072 Video or S-video images can be displayed as small images on the computer’s image. (Referred to as “sub-pictures” in this manual.) Press PIP.

  • Page 35: Displaying Information

    Displaying Information Remote control ON / STANDBY INPUT KEYSTONE AUTO FREEZE MUTE CALL RESIZE CALL MENU VOL/ADJ ENTER EXIT CT-90072 Information on the input signal source, etc., can be displayed. CALL Press CALL. The information described below is displayed. The information display turns off when the CALL button is pressed again.

  • Page 36: Adjustments And Settings On The Menu Screen

    Adjustments and settings on the menu screen QUICK MENU Item Contrast Adjust the image contrast Brightness Adjust the image brightness (paying attention to the dark parts) Color Adjust the image color (except for Computer inputs) Phase Adjust the image flicker (Computer input) Computer input: Set brightness priority or picture quality (color) priority Picture mode Except computer input: Standard/Movies/Sports...

  • Page 37: Operating The Menu Screen

    Operating the menu screen MENU Start Press the MENU button to display the QUICK MENU. MENU Selected item (orange) Input source name QUICK MENU Computer Contrast Brightness Phase Picture mode Bright True color Kystone Input source setting [ENTER] Language [ENTER] Adjust the contrast of the image.

  • Page 38: Quick Menu Adjustments And Settings

    QUICK MENU adjustments and settings You can set the basic setting used frequently. Control panel Remote control (Main unit side) AUTO KEYSTONE VOL/ADJ. ON / STANDBY INPUT KEYSTONE AUTO FREEZE MUTE CALL RESIZE ENTER MENU VOL/ADJ MENU MENU ENTER EXIT CT-90072 TEMP LAMP BUSY...
  • Page 39 QUICK MENU adjustments and settings (continued) Control panel Remote control (Main unit side) AUTO AUTO KEYSTONE VOL/ADJ. ON / STANDBY INPUT KEYSTONE AUTO FREEZE MUTE CALL RESIZE ENTER EXIT MENU VOL/ADJ MENU INPUT ON/STANDBY ENTER EXIT CT-90072 TEMP LAMP BUSY Use the selection buttons ( / ) to select the adjustment and setting items.
  • Page 40 QUICK MENU adjustments and settings (continued) Control panel Remote control (Main unit side) AUTO KEYSTONE VOL/ADJ. VOL/ADJ. ON / STANDBY INPUT KEYSTONE AUTO FREEZE MUTE CALL RESIZE ENTER MENU VOL/ADJ MENU ON/STANDBY ENTER EXIT CT-90072 TEMP LAMP BUSY When selecting “Contrast”, “Brightness”, “Color”, “Phase”, “Keystone”, “Picture mode”, in step 2.
  • Page 41 QUICK MENU adjustments and settings (continued) Control panel Remote control (Main unit side) AUTO AUTO KEYSTONE VOL/ADJ. ON / STANDBY INPUT KEYSTONE AUTO FREEZE MUTE CALL RESIZE ENTER EXIT MENU VOL/ADJ MENU INPUT ON/STANDBY ENTER EXIT CT-90072 TEMP LAMP BUSY When selecting “Input source setting”...
  • Page 42 QUICK MENU adjustments and settings (continued) Control panel (Main unit side) Remote control AUTO KEYSTONE VOL/ADJ. ON / STANDBY INPUT KEYSTONE AUTO FREEZE MUTE CALL RESIZE ENTER MENU VOL/ADJ MENU MENU ENTER EXIT CT-90072 TEMP LAMP BUSY When selecting “Language” in step 2. (Set the language used in the menu display.) ENTER ENTER AUTO...
  • Page 43 QUICK MENU adjustments and settings (continued) Control panel (Main unit side) Remote control AUTO AUTO KEYSTONE VOL/ADJ. ON / STANDBY INPUT KEYSTONE AUTO FREEZE MUTE CALL RESIZE ENTER ENTER EXIT MENU VOL/ADJ MENU INPUT ON/STANDBY ENTER EXIT CT-90072 TEMP LAMP BUSY EXIT After the adjustments and settings are...

  • Page 44: Full Menu Adjustments And Settings - Picture

    FULL MENU adjustments and settings – Picture You can adjust contrast, brightness, color level, image position, etc. Control panel Remote control (Main unit side) AUTO KEYSTONE VOL/ADJ. ON / STANDBY INPUT KEYSTONE AUTO FREEZE MUTE CALL RESIZE ENTER MENU VOL/ADJ MENU ENTER EXIT...
  • Page 45 FULL MENU adjustments and settings picture (Continued) Control panel Remote control (Main unit side) AUTO AUTO KEYSTONE VOL/ADJ. ON / STANDBY INPUT KEYSTONE AUTO FREEZE MUTE CALL RESIZE ENTER EXIT MENU VOL/ADJ MENU INPUT ON/STANDBY ENTER EXIT CT-90072 TEMP LAMP BUSY Settings Inputs...
  • Page 46 FULL MENU adjustments and settings – Picture (continued) Screen size (Computer input) Screen size (Video input, S-Video input, Y/P Icon Type Signal of 4:3 Vista Size CinemaScope 1080i, 720p Resolution under SVGA Thru Full input) SSSSSSSSSSSSSSSS SSSSSSSSSSSSSSSS SSSSSSSSSSSSSSSS SSSSSSSSSSSSSSSS SSSSSSSSSSSSSSSS SSSSSSSSSSSSSSSS Resolution over XGA Thru...
  • Page 47 FULL MENU adjustments and settings – Picture (continued) Control panel (Main unit side) Remote control AUTO AUTO KEYSTONE VOL/ADJ. ON / STANDBY INPUT KEYSTONE AUTO FREEZE MUTE CALL RESIZE ENTER EXIT MENU VOL/ADJ MENU INPUT ON/STANDBY ENTER EXIT CT-90072 TEMP LAMP BUSY When selecting “Position”...
  • Page 48 FULL MENU adjustments and settings – Picture (continued) Control panel Remote control (Main unit side) AUTO AUTO KEYSTONE VOL/ADJ. ON / STANDBY INPUT KEYSTONE AUTO FREEZE MUTE CALL RESIZE ENTER ENTER EXIT MENU VOL/ADJ MENU INPUT ON/STANDBY ENTER EXIT CT-90072 TEMP LAMP BUSY When selecting “Signal format”, “Video mode”...
  • Page 49 FULL MENU adjustments and settings – Picture (continued) Control panel Remote control (Main unit side) AUTO AUTO KEYSTONE VOL/ADJ. ON / STANDBY INPUT KEYSTONE AUTO FREEZE MUTE CALL RESIZE ENTER ENTER EXIT MENU VOL/ADJ MENU INPUT ON/STANDBY ENTER EXIT CT-90072 TEMP LAMP BUSY After the adjustments and settings are...

  • Page 50: Full Menu Settings - Audio

    FULL MENU settings – Audio You can set the audio signals developed from the speaker. (The speaker output is monaural.) Control panel Remote control (Main unit side) AUTO AUTO KEYSTONE VOL/ADJ. ON / STANDBY INPUT KEYSTONE AUTO FREEZE MUTE CALL RESIZE ENTER EXIT...
  • Page 51 FULL MENU settings – Audio (continued) Control panel Remote control (Main unit side) AUTO AUTO KEYSTONE VOL/ADJ. ON / STANDBY INPUT KEYSTONE AUTO FREEZE MUTE CALL RESIZE ENTER EXIT MENU VOL/ADJ MENU INPUT ON/STANDBY ENTER EXIT CT-90072 TEMP LAMP BUSY Press VOL/ADJ (+/-) to adjust and set.

  • Page 52: Full Menu Settings - Keystone

    FULL MENU settings – Keystone • If the screen is not installed vertically, you can adjust the keystone distortion manually. • The projector stores the standard conditions of horizontal installation, but depending on the usage environment (if the projector is subject to vibrations or shock, etc.), the standard may change.
  • Page 53 FULL MENU settings – Keystone (continued) Control panel Remote control (Main unit side) AUTO AUTO KEYSTONE VOL/ADJ. ON / STANDBY INPUT KEYSTONE AUTO FREEZE MUTE CALL RESIZE ENTER EXIT MENU VOL/ADJ MENU INPUT ON/STANDBY ENTER EXIT CT-90072 TEMP LAMP BUSY When selecting “Keystone”...

  • Page 54: Full Menu Settings - Display

    FULL MENU settings – Display You can set the language, menu display and start-up screen, etc. Control panel Remote control (Main unit side) AUTO KEYSTONE VOL/ADJ. ON / STANDBY INPUT KEYSTONE AUTO FREEZE MUTE CALL RESIZE ENTER MENU VOL/ADJ MENU ON/STANDBY ENTER EXIT...
  • Page 55 FULL MENU settings – Display (continued) Control panel Remote control (Main unit side) AUTO AUTO KEYSTONE VOL/ADJ. ON / STANDBY INPUT KEYSTONE AUTO FREEZE MUTE CALL RESIZE ENTER EXIT MENU VOL/ADJ MENU MENU INPUT INPUT ON/STANDBY ENTER EXIT CT-90072 TEMP LAMP BUSY When selecting “Language”...
  • Page 56 Press VOL/ADJ (+/-) to adjust and set. No signal background (Setting of screen of no signal input) Logo: The TOSHIBA logo screen is displayed. Blue background: The entire screen is blue. None: The screen is black.

  • Page 57: Full Menu Settings - Default Setting

    FULL MENU settings – Default setting You can set the input source which can be selected by the INPUT button; you can also set the projection mode, power off at no signal status, power on mode and lamp power. Control panel Remote control (Main unit side) AUTO...
  • Page 58 FULL MENU settings – Default setting (continued) Control panel Remote control (Main unit side) AUTO KEYSTONE VOL/ADJ. ON / STANDBY INPUT KEYSTONE AUTO FREEZE MUTE CALL RESIZE ENTER MENU VOL/ADJ MENU ON/STANDBY ENTER EXIT CT-90072 TEMP LAMP BUSY When selecting “Input source setting” in step 3. (Set the input that can be selected using INPUT button.) ENTER ENTER...
  • Page 59 FULL MENU settings – Default setting (continued) Control panel Remote control (Main unit side) AUTO AUTO KEYSTONE VOL/ADJ. ON / STANDBY INPUT KEYSTONE AUTO FREEZE MUTE CALL RESIZE ENTER ENTER EXIT MENU VOL/ADJ MENU INPUT ON/STANDBY ENTER EXIT CT-90072 TEMP LAMP BUSY When selecting “Projection mode”...
  • Page 60 FULL MENU settings – Default setting (continued) Control panel Remote control (Main unit side) AUTO KEYSTONE VOL/ADJ. ON / STANDBY INPUT KEYSTONE AUTO FREEZE MUTE CALL RESIZE ENTER MENU VOL/ADJ MENU ON/STANDBY ENTER EXIT CT-90072 TEMP LAMP BUSY When selecting “No signal power off” or “Power on” in step 3. AUTO EXIT EXIT...

  • Page 61: Full Menu Settings - Factory Reset Mode

    FULL MENU settings – Factory reset mode You can return the adjusting or setting value to the factory default setting. Control panel Remote control (Main unit side) AUTO AUTO KEYSTONE VOL/ADJ. ON / STANDBY INPUT KEYSTONE AUTO FREEZE MUTE CALL RESIZE ENTER EXIT...
  • Page 62 FULL MENU settings – Factory reset mode (continued) Control panel Remote control (Main unit side) AUTO KEYSTONE VOL/ADJ. ON / STANDBY INPUT KEYSTONE AUTO FREEZE MUTE CALL RESIZE ENTER ENTER MENU VOL/ADJ MENU ON/STANDBY ENTER EXIT CT-90072 TEMP LAMP BUSY Press ENTER.

  • Page 63: Pip Menu Setting

    PIP menu setting You can make the PIP sub-picture settings and the sound settings when a PIP sub- picture is displayed. Control panel Remote control (Main unit side) AUTO AUTO KEYSTONE VOL/ADJ. ON / STANDBY INPUT KEYSTONE AUTO FREEZE MUTE CALL RESIZE ENTER...

  • Page 64: Trouble Indications

    Trouble indications If there is some problem inside the projector, the indicators light up or blink. Control panel (Main unit side) AUTO AUTO KEYSTONE VOL/ADJ. ENTER EXIT MENU INPUT ON/STANDBY TEMP LAMP BUSY Indicator TEMP LAMP TEMP LAMP The power does not come on. ( off ) Malfunction of the unit.

  • Page 65: Air Filter Cleaning

    Air filter cleaning CAUTION If you use the projector mounted on the ceiling, ask the dealer to carry out the maintenance such as cleaning. The filter inside the air filter cover is the part to shut out dusts or dregs. Do not use the projector with the filter taken off.
  • Page 66 Air filter cleaning (continued) Notes • When the air filter is dusty, the ventilation is impaired. This causes the temperature inside the projector to rise, and may damage the unit. • Attach the air filter cover firmly after the cleaning. If it is not set correctly, the dusts will enter and they will be projected and overlapped on the picture.

  • Page 67: Lens And Main Unit Cleaning

    Lens and main unit cleaning CAUTION If you use the projector mounted on the ceiling, ask the dealer to carry out the maintenance such as cleaning. Cleaning the lens • Use a blower or a lens cleaner to clean the lens.

  • Page 68: Lamp Replacement

    Lamp replacement The lamp will eventually begin to project dark or dull pictures and finally will not light up. (Lamp’s life length depends on the use condition.) In such a case, replace the lamp with new one. CAUTION • If you use the projector mounted on the ceiling, ask the dealer to carry out the maintenance such as cleaning or replacement of the lamp.
  • Page 69 Lamp replacement (continued) Notes • When the CALL button is pressed, the “Lamp time” (the approximate amount of time the lamp has been used) is displayed. • The lamp should be replaced if the total working time exceeds about 1,000 hours. When the “Lamp time”...

  • Page 70: Before Calling Service Personal

    Before calling service personal Check the following points before asking for support service. Refer also to “Trouble indications”. Symptom The power does not come on. • The power cord is disconnected. • The lamp cover is not attached correctly. The power turns off while •...
  • Page 71 Before calling service personal (continued) Symptom The color is faint. • The “Color”, “Tint”, “R-Level”, “G-Level” or “B-Level” adjustments The tint is not good. are not correct. • The lamp life is ending. The remote control does not • The remote control is not facing the remote sensor. work.

  • Page 72: Pin Assignment Of Component In Connector

    Pin assignment of COMPONENT IN connector Input signal COMPONENT IN • Y/P Y signal: • Computer input R, G, B signal: H.sync signal: V.sync signal: Mini D-sub 15pin connector Description Pin No. Component input Video signal (Red) Color difference signal (P Luminance signal (Y) Video signal (Green) Video signal (Blue)

  • Page 73: Applicable Signal

    Applicable signal Applicable computer signal The unit is applicable to the following signals. However, some computers may have different timings than those in the chart. Make the necessary adjustments if the picture has flickers or is blurred. Timing chart Mode Resolution (Pixels) TEXT70...
  • Page 74 Applicable signal (continued) Timing chart (Continued) Mode Resolution *SXGA1152x864 75Hz 1152 x 864 *SXGA1280x960 60Hz 1280 x 960 *SXGA1280x960 85Hz 1280 x 960 *SXGA1280x1024 60Hz 1280 x 1024 *SXGA1280x1024 75Hz 1280 x 1024 *SXGA1280x1024 85Hz 1280 x 1024 *UXGA60 1600 x 1200 *UXGA65 1600 x 1200 *UXGA70...

  • Page 75: Controlling The Projector By Using Rs-232C

    Controlling the projector by using RS-232C You can also control the projector by entering the command from a computer via RS-232C. Signal assignment of RS-232C Pin No. Signal CONTROL RS-232C Command list Classification Items/Status Power Off (with confirmation message) Shut Down (without confirmation message) Normal (RS-232C Condition Display Off) Picture Contrast...
  • Page 76 Controlling the projector by using RS-232C (continued) Classification Items/Status Picture Position Picture mode (Computer) Picture mode (Component, Video, S-Video) Video mode Signal format Screen size (Computer) Screen size (Component, Video, S-Video) Level Selection Command H-position V-position Bright True color Standard Cinema Sports Auto.
  • Page 77 Controlling the projector by using RS-232C (continued) Classification Items/Status Audio Speaker output Channel select (RCA) Loudness (RCA) Channel select (Mini) Loudness (Mini) Keystone Keystone Horizontal reference value reset Display Language English French German Italian Spanish Portuguese Japanese Chinese(Simplified) Chinese(Traditional) Korean No signal background Logo Blue background...
  • Page 78 Controlling the projector by using RS-232C (continued) Classification Items/Status Display Menu background translucent Start-up screen Default Input source setting setting COMPONENT VIDEO S-VIDEO Projection mode No signal power off Power on Factory reset mode Status display (CALL) Selection Adjustment Command Computer Component Standard...
  • Page 79 Controlling the projector by using RS-232C (continued) Classification Items/Status Volume Increase Decrease Input select Toggle COMPONENT VIDEO S-VIDEO RESIZE Increase the enlargement ratio Decrease the enlargement ratio (Minimum: reset status) Move the enlargement Upper section Lower Lefter Righter Enlargement reset FREEZE MUTE PIP input source...

  • Page 80: Specifications

    Specifications Main unit Power consumption 265W (Standby: 18W) Mass 5.3kg Dimensions 345 x 104 x 281 (mm) (W/H/D) (Except the protrusion parts) Cabinet Material ABS resin Ambient environment Temperature : 0 C to 35 C Humidity : 30% to 70% RH Lamp High pressure mercury lamp Projection screen size...

This manual is also suitable for:

Tlpmt7uTlp-mt7

Table of Contents