Table of Contents
Advertisement
Press the
SHIFT
7
button to blink end time.
Set end time to 17:00
with the SET button and
the
SHIFT button in
the same manner as 6.
TIME MODE
DISPLAY
–
+
SET
TRACKING
SHIFT
LOCATION SELECT
Press the
SHIFT
8
button and the + SET
button to set recording
time mode to A24H.
TIME MODE
DISPLAY
–
+
SET
TRACKING
SHIFT
LOCATION SELECT
i
The
TIME MODE button is pressed, the display
changes as follows.
120H
168H
L01
L02
A18
A24
24
48
i
The
TIME MODE button is pressed, the display
changes in the reverse direction.
IF A POWER FAILURE SHOULD OCCUR
i
If a power failure occurs, the PW.FAIL display appears
in the VCR display. To erase this display press one of
the operations buttons.
i
If the power failure is recovered within 10 days, and the
battery is charged continuously for more than 48 hours
in the ambient temperature, the date/time data and
timer recording programs remain in the memory.
PROGRAM
FR1 ON --:--
--:-- 120H
FR2 ON --:--
--:-- 120H
SA1 ON --:--
--:-- 120H
SA2 ON --:--
--:-- 120H
SU1 ON --:--
--:-- 120H
SU2 ON --:--
--:-- 120H
DLY ON
8:30
--:-- 120H
MENU=[DISPLAY]
PROGRAM
FR1 ON --:--
--:-- 120H
FR2 ON --:--
--:-- 120H
SA1 ON --:--
--:-- 120H
SA2 ON --:--
--:-- 120H
SU1 ON --:--
--:-- 120H
SU2 ON --:--
--:-- 120H
DLY ON
8:30
17:30 120H
MENU=[DISPLAY]
PROGRAM
FR1 ON --:--
--:-- 120H
FR2 ON --:--
--:-- 120H
SA1 ON --:--
--:-- 120H
SA2 ON --:--
--:-- 120H
SU1 ON --:--
--:-- 120H
SU2 ON --:--
--:-- 120H
DLY ON
8:30
17:00 120H
MENU=[DISPLAY]
PROGRAM
FR1 ON --:--
--:-- 120H
FR2 ON --:--
--:-- 120H
SA1 ON --:--
--:-- 120H
SA2 ON --:--
--:-- 120H
SU1 ON --:--
--:-- 120H
SU2 ON --:--
--:-- 120H
DLY ON
8:30
17:00 120H
MENU=[DISPLAY]
L03
A2
A6
A12
72
120
Press the DISPLAY
9
button twice to erase the
MENU screen.
TIME MODE
DISPLAY
–
+
SET
TRACKING
SHIFT
LOCATION SELECT
Press the TIMER button.
10
TIMER
i
The power goes off and the TIMER display lights in the
VCR display.
i
Recording starts at the programmed start time.
Notes:
i
If the TIMER button is pressed at the moment between
start time and end time, recording starts immediately.
i
To cancel the timer recording, press the POWER button or
the TIMER button.
i
The time difference between start time and end time
should be more than 1 minute. If they are same, timer
recording doesn't work.
i
The accuracy of the time display depends on the condi-
tions of use and the environment. Set clock to the exact
time by daily check.
i
During timer power off mode, alarm recording will not
operate at all.
During the 12 hour display, the display appears as follows.
FR1 ON -:---
FR2 ON -:---
SA1 ON -:---
SA2 ON -:---
SU1 ON -:---
SU2 ON -:---
DLY ON -:---
8/28/96 WED
17:30:02 A 2
REC
SP
TIMER
PROGRAM
-:--- 120H
-:--- 120H
-:--- 120H
-:--- 120H
-:--- 120H
-:--- 120H
-:--- 120H
MENU=[DISPLAY]
H
26
Advertisement
Table of Contents
