Making A Phone Call - Panasonic RP-BTS35E Operating Instructions Manual

Making a phone call

®
With Bluetooth enabled phones (cell phones or smartphones) that support the "HSP" or "HFP" Bluetooth
profile, you can use the unit for phone calls.
• HSP (Headset Profile):
This profile can be used to receive monaural sounds and establish two-way communication using the
microphone on the unit.
• HFP (Hands-Free Profile):
In addition to the HSP functions, this profile has the incoming and outgoing calls function.
(This unit does not have a function that allows you to make phone calls independently of a Bluetooth
phone.)
1
Connect the Bluetooth
2
Press [ ] on the unit and answer the incoming call.
• During an incoming call, ringtone will sound from the earphones and the LED will
blink.
• (HFP only) To reject the incoming call, press [
3
Start talking.
• The LED will repeatedly blink 2 times during a call.
• The volume can be adjusted during a phone call. For setting instructions, see page 12.
4
Press [ ] to end the phone call.
• A beep will sound.
Note
• There may be instances when hands free setting needs to be done on the Bluetooth
• Depending on the Bluetooth
the unit.
• (HFP only) The calling device will be switched between the Bluetooth
unit twice quickly to switch.)
• You can have a phone conversation using the microphone of the unit by making a call from the Bluetooth
phone.
®
device and the unit. (
®
enabled phone, you may hear incoming and outgoing call ringtones of the phone from
Operation
9, "Connecting a Bluetooth
l
] twice quickly.
®
enabled phone and the unit. (Press [
13
®
®
device")
®
enabled phone.
®
®
enabled
] on the
enabled