Page 1
USER’S GUIDE MBP35 BABY MONITOR USER’S GUIDE The features described in this user’s guide are subject to modifications without prior notice. V 0.1...
Page 2
Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.
Page 3
Overview of your Parent unit TALK MENU 1. Display (LCD screen) 7. Microphone < > 8. Menu key 2. Up / Down key Press to open the Menu Normal mode: Adjust options speaker volume 9. Talk key Menu mode: Adjust setting Press and hold to speak to 3.
Page 4
Overview of your Baby unit 1. Photo sensor 6. On/Off switch 2. Camera lens 7. Speaker 3. Infrared LEDs 8. Antenna 4. Power LED 9. Temperature sensor 5. Night lights Important guidelines for installing your Baby Monitor • To use your video monitor baby and parent unit together, you must be able to establish a radio link between them, and the range will be affected by environmental conditions.
Table of contents 1. Safety Instructions ................. 6 2. Getting started................7 Baby unit battery installation............7 Baby unit power supply ..............8 Parent unit battery Installation ............8 Parent unit power supply ..............9 Registration ..................10 3. Using the Baby Monitor MBP35 ..........11 Setting up ..................11 Night vision ...................11 Talk function .................11...
1. Safety Instructions WARNING This baby monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as described in the User’s Guide, safe to use. Therefore, always read the instructions in this User’s Guide carefully before using the device. •...
2. Getting started Baby unit battery installation The camera uses either 3 AA size batteries (non-rechargeable batteries recommended) or the household mains electricity. The Baby unit has no charging function! IMPORTANT The non-rechargeable batteries for the Baby unit are not supplied with your product.
Baby unit power supply 1. Connect the small plug of the power adaptor to the baby unit and the other end to the electrical outlet (110V/60Hz). NOTE Only use the enclosed power adaptor (6V DC / 1000mA). 2. Slide the power switch to the position.
1. Loosen the screw in a counterclockwise direction using a small screwdriver. Remove the battery cover. 2. Insert the wire tab of the rechargeable battery pack into the contact slot as shown above and fit the battery pack into the compartment. 3.
2. Press to switch ON the parent unit. The power LED will light up in green. 3. Press and hold to turn OFF the parent unit. NOTE Once the baby and parent units are switched on, the display on the parent unit will show the video captured by the baby unit.
3. Using the Baby Monitor MBP35 Setting up • Place the camera in a convenient location and point the lens of the camera towards the area you want to monitor. • Tilt the head of the baby unit up or down to your desired position until the parent unit gets a good reception of the baby.
Playing a lullaby for your baby You can remotely activate a lullaby to be played on the baby unit. 1. Press once on the parent unit to play the lullaby. Press again to pause playback. 2. To select another lullaby, press during playback.
4. MBP35 Parent Unit Menu Options Brightness 1. Press repeatedly until appears on the LCD screen. < > 2. Press to adjust the LCD brightness level to , or (the default setting is ). The LCD brightness will be adjusted accordingly. 3.
Voice Activation The sound detection sensitivity level (VOX) of the Baby Monitor can be adjusted. If the baby is a quiet sleeper, the sensitivity level can be increased so that minor disturbances can be detected and transmitted to the parent unit. 1.
5. Disposal of the device (environment) At the end of the product lifecycle, you should not dispose of this product with normal household waste, but take the product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user’s guide and/or box indicates this.
6. Cleaning Clean the MBP35 with a slightly damp cloth or with an anti-static cloth. Never use cleaning agents or abrasive solvents. Cleaning and care • Do not clean any part of the product with thinners or other solvents and chemicals –- this may cause permanent damage to the product which is not covered by the Warranty.
7. Help Display No display • Try recharging or replacing the batteries. • Reset the units. Unplug the units’ electrical power, including the batteries and both mains adapters, then plug them back in. • Is the unit turned on? Press and release on the parent unit to turn it on.
Subject to the exclusions and limitations contained below, Binatone Electronics International LTD. warrants the Motorola branded consumer products that it manufactures (“Products”) and the Motorola branded or certified accessories sold for use with these Products that it manufactures (“Accessories”) to be free from defects in materials and workmanship under normal consumer usage for the period(s) outlined below.
Page 19
REFUND AS PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL WARRANTIES AND MOTOROLA AND BINATONE ELECTRONICS INTERNATIONAL LTD. MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OF IMPLIED. IN NO EVENT SHALL MOTOROLA OR BINATONE ELECTRONICS INTERNATIONAL LTD.
Page 20
ACCESSORIES AND BINATONE ELECTRONICS INTERNATIONAL LTD. SHALL UNDER NO CIRCUMSTANCES BE LIABLE FOR ANY CLAIMS OR DEMANDS MADE BY ANY THIRD PARTY OR MADE BY YOU ON BEHALF OF ANY THIRD PARTY TO THE FULL EXTENT THESE DAMAGES OR CLAIMS MAY BE DISCLAIMED BY LAW. Some states, countries or jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or exclusions may...
Page 21
Accessories for commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions; or (e) other acts or omissions which are not the fault or neglect of Motorola or Binatone Electronics International LTD., are excluded from coverage. Use of Non-Motorola branded Products and Accessories. Defects or...
Page 22
How to Obtain Warranty Service or Other Information? To obtain service or information, please call: 1-888-331-3383 CANADA: 905-831-6555 You will receive instructions on how to ship the Products or Accessories, the shipment of which shall be at your own risk and expense, to a BINATONE ELECTRONICS INTERNATIONAL LTD.
Page 23
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. •...
Page 24
The term "IC: " before the certification/registration number only signifies that the Industry Canada technical specifications were met. This product meets the applicable Industry Canada technical specifications. RENSEIGNEMENTS RELATIFS AUX RÈGLEMENTS DE LA COMMISSION FÉDÉRALE DES COMMUNICATIONS 'FCC' ET D'INDUSTRIE Canada 'IC' Article 15 des règlements du FCC AVIS: Cet équipement a été...
Page 25
parasites qu'il reçoit, incluant les parasites pouvant nuire à son fonctionnement. La confidentialité des communications peut ne pas être assurée avec cet appareil. Afin de garantir la sécurité des utilisateurs, la FCC a établi les critères relatifs à l'énergie générée par les fréquences radio pouvant être absorbée en toute sécurité...
Page 26
Technical Specifications Baby unit Frequency 2.4GHz to 2.4835GHz Maximum range Extended range up to 450 feet* *Based on unobstructed line of sight. Actual range will vary depending on surroundings. Image sensor Color CMOS Lens f 2.5mm, F 2.8 IR LED 8 pcs Power Adaptor:...
Page 27
MOTOROLA and the Stylized M Logo, and other Motorola trademarks and trade dress are owned by Motorola, Inc. and are used under license from Motorola, Inc. MOTOROLA and the Stylized M Logo are registered in the US Patent &...