Sealey AK49 Instruction Manual

Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT:
REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE
PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY
AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY INSTRUCTIONS
r WARNING! Ensure Health & Safety, local authority and general workshop practice regulations are adhered to when using this equipment.
3 Familiarise yourself with the application and the limitations of the grease gun, as well as the potential hazards.
3 Keep the work area clean, uncluttered and ensure there is adequate lighting.
3 Keep the grease gun clean for best and safest performance.
3 Check moving parts alignment on a regular basis.
7 DO NOT use the grease gun for any purpose other than that it was designed for.
7 DO NOT operate the grease gun if any parts are damaged or missing, as this may cause failure and/or personal injury.
3 When not in use store in a safe, dry, childproof location.
r WARNING! Always wear approved eye protection when operating the grease gun.
2. INTRODUCTION & SPECIFICATION
Highly durable die-cast aluminium alloy pump head. Features dual piston design ideal for a variety of applications. 2-way fill with cartridge or manual
capability. Fitted with adjustable pressure switch on lever allowing user to select between low pressure/high volume and high pressure/low volume,
depending on the particular application. Supplied with rigid delivery tube and push on hydraulic 4-jaw coupling. Rubber gripped grease tube and
handle for easy grip. Accepts standard 400g cartridges.
© Jack Sealey Limited
INSTRUCTIONS FOR:
ADJUSTAbLE FLOW GREASE GUN
2-WAY FILL HEAVY-DUTY
MODEL No: AK49
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL
Fig.1
Original Language Version
Fig.2
AK49 Issue No.1 - 25/09/13