Page 1
Be sure to read this manual before use Notes on Usage • In this manual, the “AQUOS sense3 SHV45” is abbreviated as the “SHV45” or the “product”. • In this manual, “au Nano IC Card 04” is abbreviated as “au IC Card”.
When Using the Product Before using the product, read the “Safety Precautions” in this manual for correct use. If you think the product may be malfunctioning, first check with the “quick diagnostic” and “trouble diagnostic” from the “Repair and Delivery Support” app.
Page 3
• Since the product is a radio station under the Radio Law, you may be asked to temporarily submit the product for inspection in accordance with the Radio Law. • The IMEI information of your cell phone is automatically sent to KDDI CORPORATION for maintenance and monitoring operational status of your cell phone.
Page 4
* “The Company” as appears in this manual refers to the following companies: Sold by: KDDI CORPORATION, OKINAWA CELLULAR TELEPHONE COMPANY Manufactured by: SHARP CORPORATION ◎ Reproduction of the content of this manual in part or in whole is prohibited.
Safety Precautions (Observe Strictly) ■ Before using the product, thoroughly read these safety precautions for proper use. ■ These precautions contain information intended to prevent injury to the user and to surrounding people, as well as damage to property, and must be observed at all times. ■...
Page 6
■ Explanation of Prohibited or Enforcement Symbols Indicates that handling Indicates an action that with wet hands is not is not allowed. Wet hands allowed. Prohibited prohibited Indicates that Indicates that instructions specified disassembly is not are compulsory (must Disassembly allowed.
Page 7
Do not sprinkle sand, soil or dirt on the equipment or put the equipment directly on it. Also, do not touch the equipment when sand etc. is adhering to your hand. Prohibited May cause fires, burns, injury, electric shock, etc. Refer to the following for details on waterproofness/ dustproofness.
Page 8
Do not attempt to remove the back cover from the product. May cause fires, burns, injury, etc. Prohibited Do not get the equipment wet with liquids such as water (drinking water, sweat, seawater, pet urine, etc.). May cause fires, burns, injury, electric shock, etc. Wetting with water Refer to the following for details on waterproofness.
Page 9
Do not cover or wrap the equipment with bedding etc. when using or charging. May cause fires, burns, etc. Prohibited If charging is not completed after the specified charging time, stop charging. May cause fires, burns, injury, etc. because of overcharging. Instruction Always turn off the product before you enter a place where flammable gas may be present, or a place where dusts are...
Page 10
Do not leave the equipment on unstable surfaces, such as on a wobbly table or sloped surface. Be very careful while the vibrator is set. Prohibited May fall and cause injury etc. Do not use or store the equipment in locations that are subject to humidity, dust or high temperatures.
Page 11
May cause fires, burns, injury, etc. Prohibited Do not apply excessive force on the product such as puncturing it with a sharp object (nail etc.), hitting it with a hard object (hammer etc.) or stepping on it. Prohibited May cause fires, burns, injury, etc.
Page 12
Do not allow water or other liquids (drinking water, sweat, seawater, pet urine, etc.), metal, flammable material or other foreign object to enter the au IC Card/microSD memory card Prohibited tray slot on the product. Also, do not mistake the slot place and direction of the au IC Card or microSD memory card.
Page 13
Keep the product away from the ears during a call in which hands-free is set, while the ringtone is ringing loudly, during stand-by, etc. Instruction When you attach the earphone/microphone etc. to the product to play games, video/music, etc., do not make the volume too loud.
Page 14
Turn off the product near high-precision electronic devices or devices that use weak electronic signals. May interfere with the operation of electronic devices because of Instruction signals. ※Take particular care with the following devices Hearing aids, implanted cardiac pacemakers, implanted cardioverter-defibrillators, other electronic medical equipment, other equipment controlled by electronic signals, etc.
Page 15
If the display is broken and the internal substance then leaks, do not get it on your skin (face, hands, etc.), clothes, etc. May result in damage your eyes or skin. Prohibited If the internal substance comes into contact with your eyes, mouth, skin or clothes, immediately rinse the contacted area with clean water.
Page 16
Make sure that there is no metal (a blade of cutter, staple, etc.) on the product because the earpiece (receiver), speaker and standard out camera section contain parts that generate Instruction magnetic waves. May cause injury etc. because of the adhered object. Look at the display in a well-lit place, keeping a certain distance.
Page 17
Do not connect the voltage converter for overseas travel (travel converter) to the specified charger (sold separately). May catch fire, or cause overheat, electric shock, etc. Prohibited Do not apply excessive force on the connection part with the specified charger (sold separately) connected to the product. May cause fires, burns, injury, electric shock, etc.
Page 18
When plugging/unplugging a specified charger (sold separately) into/from the product, plug/unplug it straightly toward the jack to connect, not applying excessive force on it Instruction such as pulling the cord. May cause fires, burns, injury, electric shock, etc. if you do not plug/unplug it correctly.
Page 19
Be careful with the cutting surface not to injure any part of your body such as fingers when handling the au IC Card. May cause injury etc. because the cutting surface may be sharp. Instruction ■ Use near Medical Instruments and Inside Medical...
Page 20
If there is any chance that the distance between the product and a person closest to you may get shorter than 15 cm such as when you cannot freely move around, set the product not Instruction to emit radio wave in advance (by setting Airplane mode, turning the power off, etc.).
Material List Part Material Surface treatment Display side (Glass section) Reinforced glass AF coating Display side (Protective film PET resin AF coating, Hard section) coating Outer case Aluminum Anodizing Outer case (Antenna) PBT resin (With None glass) Power key Aluminum Anodizing Volume up/down key Aluminum...
Handling Precautions These precautions are provided to prevent product faults and to ensure that performance can be fully demonstrated. Thoroughly read these precautions to ensure correct use. ■ Precautions common to the main unit, internal battery, charger, au IC Card, peripheral devices ●...
Page 23
● Do not use in places subject to lots of dust or vibration. Doing so might cause a fault. ● Clean the product with a soft dry cloth (such as the type used for eyeglasses). Forceful rubbing with a dry cloth may scratch the display. The display may be stained if splash or smear is left attached to the surface.
Page 24
● Do not forcefully press, tap or intentionally subject the display to strong impact. Doing so might cause scratching or damage. ● Do not forcefully press sharp objects or hard objects against keys or display surface. Doing so might cause scratching or damage.
Page 25
● Take care not to place magnetized items such as magnetic cards, speakers and TV sets near the product, as it might cause malfunction. Putting strong magnetism close to the product might cause false operation. ● Do not bring the product close to magnetic cards such as cash cards, credit cards, and prepaid cards.
Page 26
● The touch panel is designed to be lightly touched by fingers. Do not apply strong pressure with your fingers or sharp-pointed objects (such as ballpoint pens and pins) on the touch panel. In the following cases, the touch panel may not work even if you touch it.
Page 27
■ Internal battery (The internal battery of the product is a lithium-ion battery.) The internal battery is not fully charged at the time of purchase. Charge the battery before using the product. Also charge the battery after long periods of disuse before using the product.
Page 28
■ Charger ● Do not wrap the power cord of the specified charger (sold separately) around the charger. Also, do not forcibly bend the charger's plug or the connection between the connector and power cord. Do not apply excessive force to it such as placing a heavy object on the cable of it or pulling it. Doing so might cause a fault.
■ Copyrights and rights of portrait ● If the data you shot or recorded using the product or the data you downloaded from the Internet etc. is in part or in whole protected by the third party's copyright, you are not allowed to copy, distribute, publicly send, modify the data without consent of the copyright holder, except for personal use such as copying or quoting where provided for under the copyright law.
Page 30
Waterproof, Dustproof, and Shock-resistant Properties of the Product The product has a protection rating (JIS C 0920) for waterproof property equivalent to IPX5 and IPX8 , as well as dustproof property equivalent to IP6X on the condition that the au IC Card/microSD memory card tray is securely closed (Based on the experiments by the Company).
Page 31
• If liquid such as water is splashed onto the product with the au IC Card/ microSD memory card tray opened, the liquid may seep inside and cause electric shock or fault. Stop using it, turn off the power and then contact an au shop near you or Repair and Delivery Support Center.
■ Dustproof property of the product • The dustproof property of the product only guarantees a protection rating equivalent to IP6X and does not guarantee its performance under other using conditions such as when the product is directly put on sand such as a beach. •...
Page 33
• Do not drop or subject to impact. Also, do not jab the earpiece (receiver)/ speaker, mouthpiece (microphone), etc. with a sharp object. Doing so may cause damage or deformation to/of the product, resulting in impairment of waterproof/dustproof property.
• Do not remove or scratch it. • When closing the au IC Card/microSD memory card tray, do not get the rubber seal caught. Also, do not insert sharp objects into gaps around the au IC Card/microSD memory card tray, the earphone/microphone jack or external connection jack section.
• Do not touch the specified charger (sold separately) with wet hands. Doing so may cause electric shock. • Do not splash water onto the specified charger (sold separately) or optional accessories when using the equipment and do not use it in places where water is regularly used such as a bathroom, shower room, kitchen and lavatory.
Draining Water If the product gets wet, make sure to drain water remaining in the earphone/ microphone jack section, external connection jack section, earpiece (receiver)/ speaker section, mouthpiece (microphone) section, key section, air vent, etc. Wipe off water on the surface of the product carefully with a dry and clean cloth etc.
Page 37
Hold the product securely and shake it approximately 20 times until there is no more water splashing. Make sure of the safety around you and shake the product while holding it securely not to let it drop. Earpiece (Receiver) section Earphone/ Microphone jack section External...
Page 38
Air vent (at mobile light) Wipe off water remaining in the grooves of each section by gently putting the product against a dry and clean cloth etc. Since water is sometimes left in the grooves of each section, clear them of water by putting a cloth against their openings and gently patting them.
Lay out a dry cloth etc. beneath and leave the product on the cloth at room temperature for approximately 2 to 3 hours to dry it. Water, if any, remaining in the product may ooze up after wiping off. Do not wipe off water remaining in the grooves directly by a cotton swab etc.
® Precautions about Wireless LAN (Wi-Fi ® • The wireless LAN (Wi-Fi ) function of the product conforms to the domestic standards of Japan, FCC standards and EC directives, and has been certified. • Use of wireless LAN (Wi-Fi ® ) function may be restricted in some countries/ regions.
Page 41
Bands of mobile unit identification devices cannot be avoided. • Wireless LAN (Wi-Fi ® ) function: 2.4DS/OF4 The product uses the 2.4 GHz band. DS-SS and OFDM are used as the modulation schemes. The interference distance is about 40 m or less. Bands of mobile unit identification devices can be avoided.
Page 42
■ 2.4 GHz band wireless LAN (Wi-Fi ® ) precautions ® The frequencies used by the wireless LAN (Wi-Fi ) function of the product are in the 2.4 GHz and 5GHz band. In the 2.4 GHz frequency band, in addition to home electrical appliances such as microwave ovens and industrial, scientific and medical devices, other similar wireless stations, in-plant wireless stations for mobile unit identification that require a license for use such as factory...
Page 43
◎ Connections between the product and all other Bluetooth ® and wireless ® LAN (Wi-Fi ) devices have not been confirmed. Therefore, connections ® ® with all Bluetooth and wireless LAN (Wi-Fi ) devices are not guaranteed. ◎ The product supports security features for wireless communications that ®...
Voluntary control for radio wave interference This product satisfies technical requirements based on VCCI Rules for Voluntary Control Measures and its satisfied mark is displayed on the electronic nameplate of the product. You can see the electronic nameplate by operating the product as follows. On the home screen, swipe/flick up the screen →...
Page 45
■ Lock No. (NFC/Osaifu-Keitai lock) Example To use the NFC/Osaifu-Keitai lock of usage Initial 1234 value ■ PIN Code To prevent unauthorized use of the au IC Card by a third party, you can set the product to require PIN code entry every time the power is turned on. You also need to enter PIN code when setting whether PIN code entry is required.
Notes on Data Communication Charge • Since constant Internet connection is possible with the product, data communication may be performed automatically by some applications, resulting in high data communication charges. Therefore, subscription to the flat-rate/discount service for data communication charges is recommended. •...
SD-3C, LLC. • USB Type-C™ is a trademark of USB Implementers Forum. • The Bluetooth ® word mark and logo are registered trademarks owned by the Bluetooth SIG, Inc., and SHARP CORPORATION is licensed to use these trademarks. - 46 -...
Page 48
• Wi-Fi ® ® , Wi-Fi CERTIFIED logo, Wi-Fi Direct are registered trademarks of ® Wi-Fi Alliance • Wi-Fi CERTIFIED™ is a trademark of Wi-Fi Alliance ® ® ® ® ® • The official name for Microsoft Windows is Microsoft Windows Operating System.
Page 49
“リッチカラーテクノロジーモバイル/Rich color technology Mobile”, “リラックスビュー/Relax View”, “からだメイト”, “楽 ともリンク”, “LCフォント/LCFONT” and the LC logo symbol are trademarks or registered trademarks of Sharp Corporation. • iWnn of OMRON SOFTWARE Co., Ltd. is used for conversion methods for Japanese language, and for phrase prediction methods for English.
Page 52
• Playing back MPEG-4 Video that a customer engaged in personal and non-profit activities has recorded • Playing back MPEG-4 Video obtained from a provider licensed by MPEG-LA When using for promotion, in-house use, profit use, and other intended uses, contact MPEG LA.
For inquiries, call: Customer Center For general information (toll free) Business hours: 9:00 to 20:00 (7 days a week) From au mobile phones: From non-au mobile phones / general subscriber phones: 0077-7-111 area code not required In case above numbers are not available, call toll-free: 0120-977-033 (except Okinawa) 0120-977-699...