Sealey APICCOMBO5 Instructions

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
instruction
manual
1. SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this cabinet.
ˆ
Locate cabinet in a suitable work area.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
9
WARNING! Use cabinet on level and solid ground, preferably concrete.
ˆ
Keep the cabinet clean and tidy in accordance with good workshop practice.
9
Keep children and unauthorised persons away from the work area.
9
DO NOT use the cabinet for any purpose other than that for which it is designed.
8
DO NOT use the cabinet outdoors.
8
DO NOT place the cabinet in a damp or wet location or an area where there is condensation.
8
DO NOT clean the cabinet with any solvents which may damage the surfaces or the protective coating.
8
DO NOT move the cabinet when there are items placed inside.
8
DO NOT overload the cabinet.
8
2. INTRODUCTION
Four variants of industrial quality, double door, freestanding cabinets with a range of internal shelving and drawer options. Easily assembled
with minimal tool use. Durable scuff resistant, adjustable shelving each with a weight limit of 150kg. Drawers run on heavy duty ball bearing
slides each with a weight limit of 75kg, fitted with safety locking catches preventing inadvertant opening. Reinforced steel doors with zinc
plated locking bars, provide 3 point locking. Supplied with two coded keys. Ideal for home, office, garage or workshop use.
3. SPECIFICATION
Model no: ..................................... APICCOMBO5
Width x Depth x Height
Overall size: ......................... 900 x 450 x 1800mm
Medium drawer (x3): .............. 775 x 330 x 100mm
Large drawer (x2): .................. 775 x 330 x 200mm
Shelf size (x3): .........................840 x 380 x 30mm
Internal cabinet overall size: . 850 x 420 x 1710mm
4. CABINET CONTENTS
Unpack the contents of the boxes and check against the parts
lists/diagrams. If there are any parts missing, contact your local
Sealey dealer.
Part No. Part Name
A1 Rear Panel
A2 Rear Panel
B1 Left Side Panel
B2 Right Side Panel
C1 Left Door
C2 Right Door
D Top
E Bottom
F Inner Face Plate
G Outer Face Plate
J Plastic Stop
K Locking Pin Locator 2
L Hinge Pin Locator 4
M Screw
N
Hinge Pin
© Jack Sealey Limited
INSTRUCTIONS FOR
INDUSTRIAL CABINET 5 DRAWER, 3 SHELF 1800MM
MODEL NO:
No.
1
1
1
1
1
1
1
1
1
1
4
18
4
Original Language Version
APICCOMBO5
APICCOMBO5 Issue 2(SP) - 26/07/16