Installation Instructions; Reversing The Door Swing; Before You Start; To Remove Doors - GE GTS16DTHBB Quick Use & Care

REVERSING THE DOOR SWING

BEFORE YOU START

• Unplug the refrigerator from its electrical outlet.
• Empty all door shelves, including the dairy compartment.
NOTICE: Do not let either door drop to the floor. To do so could damage the door stop.

TO REMOVE DOORS

1. Remove top hinge.
2. Lift off freezer door.
3. Remove the center hinge pin.
4. Lean the fresh food door forward and lift door off of lower hinge pin.
5. Be careful not to lose the spacer and washers.
STAINLESS STEEL HANDLE
6a. Remove handle screws from the top of fresh food door. Remove
handle screws from the bottom of freezer door.
7a. Loosen set screw on handle with the provided 1/8" wrench.
8a. Remove door handle.
9a. Change places between the handle fastener and plug button on
door front.
10a.
now vacant holes.
11a. Transfer the door stop on the bottom of the door.
12a. Attach handle to fresh food door with screws at top of handle.
Use 1/8" allen wrench to tighten set screw at bottom of handle.
13a. Attach handle to freezer door with screws at bottom of handle.
Use the provided 1/8" allen wrench to tighten set screw at top
of handle.
14a. Attach badge on freezer door opposite the handle.
PLASTIC HANDLE ASSEMBLY
6b. Remove handle screws from the top of fresh food door. Remove
handle screws from the bottom of freezer door.
7b. Remove door handle on fresh food door by sliding the handle
8b. Change places between the handle fastener and plug button on
door front.
9b.
now vacant holes.
10b. Transfer the door stop on the bottom of the door.
11b. Attach handle to fresh food door by sliding handle down onto
fastener and with screws at top of handle.
12b. Attach handle to freezer door by sliding handle up onto
fastener and with screws at bottom of handle.
13b. Attach badge on freezer door opposite the handle.

Installation Instructions

3
Top hinge
Hinge
bracket
Center Hinge
Pin
Washer