Using The Appliance; Understanding The Air Quality Light; Switching On And Off; Changing The Auto Mode Setting - Philips AC3259 User Manual

4 Using the
appliance
Understanding the air
quality light
PM2.5 Air quality
level light color
≤12
Blue
13-35 Blue-Purple
36-55 Purple-Red
>55 Red
The air quality light automatically goes
on when the appliance is switched on,
and lights up all colors in sequence.
In a short time the air quality sensors
select the color that corresponds to the
ambient air quality.

Switching on and off

1
Put the plug of the appliance in the
power socket.
2
Touch to switch on the appliance
(fig. j).
» The appliance operates under
the auto mode by default.
» After measuring the air quality
for a short time, the air quality
sensor automatically selects the
color of the air quality light.
» After measuring the particle
matters in the air, the air purifier
shows the PM2.5 level and
operates in the auto mode with
displayed on the screen
(fig. k).
3
• After the appliance is switched off by
• If the appliance is connected to
Air quality
level
Good
Fair
Poor
Changing the Auto mode
Very poor
setting
You can choose the Pollution mode
(
Bacteria & Virus mode (
Pollution mode
The specially designed pollution
mode can effectively remove airborne
pollutants such as PM2.5.
•
Allergen mode
The specially designed Allergen mode
can effectively remove common
allergens such as pollen and pet dander.
•
Touch and hold for 3 seconds to
switch off the appliance.
Note
the on/off button , if the plug is still
in the power socket, the appliance will
operate under the previous settings
when it is switched on again.
Internet after it's turned off, the sensor
will still measure the indoor air quality
and send this real-time data to the
app.
), the Allergen mode (
Touch the Auto mode button
select the Pollution mode (fig. l).
» A (Auto) and display on the
screen.
Touch the Auto mode button
select the Allergen mode (fig. m).
» Auto(A) and display on the
screen.
) and the
).
to
to
EN 7