Smart Features - Panasonic KX-HN4001 Operating Instructions Manual

*7 Reduces false detections from sounds other than your baby's voice by reducing these
sounds from the surrounding area.
If your baby's voice is not detected when using these settings, select a baby sounds setting
with a higher sensitivity. If your baby's voice is still not detected, select an all sounds setting.
*8 Displays customer support Web address.

Smart features

With the use of smart features, you can
coordinate the camera unit and monitor unit to
respond automatically to detections from the
sensors. The smart features settings can be
accessed by pressing MSMARTN while viewing
images from the camera unit.
Smart notification
By using the smart notification feature, you
can specify how the monitor unit notifies you
when motion or sound is detected by the
camera unit, and configure motion detection to
match the size of your baby. Depending on
the settings, the monitor unit can notify you by
lighting the smart LED indicator (page 16),
displaying a message, and playing a chime.
Important:
R Depending on factors such as the usage
environment, the monitor unit may not be
able to notify you of sensor detections.
Note:
R Notifications continue for 1 minute. You
can stop the notification by pressing MOKN.
Configuring sound notifications
You can specify how the monitor unit notifies
you when sound is detected, or turn off
notifications.
1
MMENUN
2
MbN: "Smart Notification" a MOKN
3
MbN: "Sound Notification" a MOKN
4
MbN: Select the desired setting.
R To turn off sound notifications:
MbN: "OFF"
5
MOKN a MMENUN repeatedly to exit.
For assistance, please visit http://shop.panasonic.com/support
Configuring motion notifications
You can specify how the monitor unit notifies
you when motion is detected, or turn off
notifications.
1
MMENUN
2
MbN: "Smart Notification" a MOKN
3
MbN: "Motion Notification" a MOKN
4
MbN: Select the desired setting.
R To turn off motion notifications:
MbN: "OFF"
5
MOKN a MMENUN repeatedly to exit.
Auto lullaby
You can configure lullabies to be played
automatically from the camera unit when
sound is detected.
Note:
R Make sure to check the camera unit's
speaker volume before playing lullabies
(page 20).
R Auto lullaby does not function during the
following.
– while using or for 5 seconds after using
the pan/tilt
– while talking to the camera unit
– while configuring lullabies to be played
Configuring the sound settings
You can specify which lullaby is played when
sound is detected, or turn lullabies off.
1
MMENUN
2
MbN: "Auto Lullaby" a MOKN
3
MbN: "Sound List" a MOKN
4
MbN: Select the desired lullaby.
R To turn off lullabies:
MbN: "OFF"
Programming
25