Advertisement

Available languages

Available languages

Quick Links

OWNER'S MANUAL
AIR CONDITIONER
Please read this manual carefully before operating
your set and retain it for future reference.
TYPE : WALL MOUNTED
Skincare Hybrid
MODELS :
S10DLMV
S13DLMV
*MFL62106324*
P/NO : MFL62106324
www.lg.com

Advertisement

Table of Contents
loading

Summary of Contents for LG Skincare Hybrid SN13DLMV

  • Page 1 OWNER’S MANUAL AIR CONDITIONER Please read this manual carefully before operating your set and retain it for future reference. TYPE : WALL MOUNTED Skincare Hybrid MODELS : S10DLMV S13DLMV *MFL62106324* www.lg.com P/NO : MFL62106324...
  • Page 2: Tips For Saving Energy

    TIPS FOR SAVING ENERGY TIPS FOR SAVING ENERGY Here are some tips that will help you minimize the power consumption when you use the air below: • Do not cool excessively indoors. This may be harmful for your health and may consume more electricity.
  • Page 3: Important Safety Instructions

    SAFETY PRECAUTIONS IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE. Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product WARNING It can result in serious injury or death when the directions are ignored CAUTION It can result in minor injury or product damage when the directions are ignored WARNING...
  • Page 4 SAFETY PRECAUTIONS Operation • Do not let the air conditioner run for a long time when the humidity is very high or when a door or window has been left open. Failure to do so may result in product failure. •...
  • Page 5 SAFETY PRECAUTIONS CAUTION Installation • Make sure to check if there is a refrigerant leak after you install or repair the air conditioner. Failure to do so may result in product failure. • Install the drain hose properly for smooth drainage of condensed water. Failure to do so may result in product failure.
  • Page 6: Table Of Contents

    TABLE OF CONTENTS TABLE OF CONTENTS TIPS FOR SAVING ENERGY ADVANCED FUNCTIONS Changing room temperature quickly IMPORTANT SAFETY Display screen brightness INSTRUCTIONS °C /°F conversion Auto clean operation BEFORE USE Skin Care operation Components Plasma Puri cation operation Auto operation Using the remote control Watt option operation - Inserting batteries...
  • Page 7: Before Use

    BEFORE USE BEFORE USE Components Air inlet Dual protection filter Indoor unit ON/OFF button Front Grille Operation lamp 3M micro- Plasmaster Ionizer Signal receiver Air outlet Horizontal vane Horizontal vane Vertical louver * The feature can be changed according to type of model. NOTE The number of operation lamps and their locations may vary, depending on the model of the air conditioner.
  • Page 8: Using The Remote Control

    BEFORE USE Using the remote control You can operate the air conditioner more conveniently with the Control Display Description panel screen Plas ma button* : Wireless remote control moving particles that enter the indoor unit. : keeps skin moisturized. Skin Care button Select ‘Watt Watt option button : Option L/LL’...
  • Page 9: Inserting Batteries

    BEFORE USE Inserting batteries Fix the holder by fastening the 2 screws Insert batteries before using the remote control. The battery type used is AAA (1.5 V). Remove the battery cover. Slide the remote control into the holder. Insert the new batteries and make sure that the + and - terminals of the batteries are installed correctly.
  • Page 10: Basic Functions

    BASIC FUNCTIONS BASIC FUNCTIONS Airing your room Cooling your room (Air Circulation operation) (Cooling operation) This mode only circulates the indoor air without changing the room temperature. The Press to turn on the power. cooling lamp lights up in air circulation mode. Press repeatedly to select the cooling Press...
  • Page 11: Adjusting The Air Flow Direction

    BASIC FUNCTIONS Adjusting the air flow direc- Turning on the air conditioner auto- matically at a set time tion Press the display screen. cally, tion automatically. tally, press tion automatically. Press to select the times. Press When setting the timer, current time and NOTE ON icon are displayed on the display screen indicating that the desired time is...
  • Page 12: Canceling The Timer Setting

    ADVANCED FUNCTIONS ADVANCED FUNCTIONS Canceling the timer setting Press - To cancel all timer settings, press vanced functions. Setting sleep mode Changing room temperature quickly tioner automatically when you go to sleep. (Jet Cool) Press to turn on the power. Press This mode allows you to cool indoor air quickly in summer or warm it quickly in winter.
  • Page 13: Auto Clean Operation

    ADVANCED FUNCTIONS Plasma Purification operation Indoor air purification Auto Clean operation microscopic contaminants from the intake air In the cooling and dehumidifying operations, completely to supply clean and fresh air. moisture is generated inside the indoor unit. Press to turn on the power. Use the auto cleaning function to remove such moisture.
  • Page 14: Auto Operation

    ADVANCED FUNCTIONS to operation (Artificial intelligence) Press one more time to select ‘Watt option LL’. ‘LL’ and are displayed Cooling-only models on the sceen. In this mode, the fan speed and the tempera- Indoor display ture adjust automatically, based on the room temperature.
  • Page 15: Operating The Air Conditioner Without The Remote Control

    ADVANCED FUNCTIONS Operating the air conditioner Restarting the air conditioner without the remote control automatically When the air conditioner is turned on again unit to operate the air conditioner when the after a power failure, this function restores the remote control is unavailable. However, the previous settings.
  • Page 16: Maintenance

    Maintenance MAINTENANCE Clean the product regularly to maintain optimal performance and to prevent possible breakdown. * This may not be provided, depending on the model. Plasma filter Dual protection filter 3M micro protection filter * The feature can be changed according to type of model. Item Cleaning interval Cleaning method...
  • Page 17: Cleaning 3M Micro Protection Filter

    MAINTENANCE Cleaning dual protection filter Cleaning 3M micro protection filter Clean the dual protection filter once Clean 3M micro protection filter once every month every 2 weeks or more if necessary. and change new filter once every 6 months cord. cord.
  • Page 18: Troubleshooting

    TROUBLESHOOTING TROUBLESHOOTING Self-diagnosis function This product has a built-in self-diagnosis function. If an error occurs, the lamp of the indoor unit will blink in 2 second intervals. If this occurs, contact your local dealer or service center. Before requesting service Please check the following before you contact the service center.
  • Page 19 TROUBLESHOOTING Problem Possible causes Corrective action Make sure that there are no curtains, Air is not circulating blinds or furniture blocking the front of the properly. air conditioner. Clean dual protection filter once every 2 The dual protection weeks. See “Cleaning dual protection filter” filter is dirty for more information.
  • Page 20 PT. LG ELECTRONICS INDONESIA Kawasan Industri MM2100 Blok G Cikarang Barat, Bekasi, Jawa Barat 17520 INDONESIA...
  • Page 21 Skincare Hybrid S10DLMV S13DLMV...
  • Page 22 KIAT MENGHEMAT ENERGI KIAT MENGHEMAT ENERGI Berikut ini adalah beberapa kiat yang akan membantu Anda meminimalkan konsumsi daya ketika udara Anda dengan membaca instruksi di bawah ini: • Jangan dinginkan ruangan dalam secara berlebihan. Hal ini akan membahayakan kesehatan Anda dan dapat mengonsumsi listrik lebih banyak. •...
  • Page 23 INSTRUKSI KESELAMATAN PENTING BACALAH SELURUH INSTRUKSI SEBELUM MENGGUNAKAN PERALATAN INI. Patuhilah selalu tindak antisipasi berikut ini untuk menghindari situasi yang berbahaya dan memastikan produk Anda tetap pada kinerja tertinggi. PERINGATAN Dapat mengakibatkan cedera serius atau kematian bila petunjuk diabaikan PERHATIAN Dapat mengakibatkan cedera ringan atau kerusakan produk bila petunjuk diabaikan PERINGATAN •...
  • Page 24 ANTISIPASI KESELAMATAN Pengoperasian • Jangan biarkan penyejuk udara beroperasi dalam waktu yang lama ketika kelembapan udara sangat tinggi atau ketika pintu atau jendela dibiarkan terbuka. Kelalaian mematuhi hal ini dapat menimbulkan kegagalan produk. • Pastikan kabel daya tidak terkelupas atau rusak ketika penyejuk udara beroperasi. Kelalaian melakukan hal ini dapat menimbulkan kebakaran, kejutan listrik, atau kegagalan produk.
  • Page 25 PERHATIAN Pemasangan • Pastikan Anda sudah memeriksa adanya kebocoran zat pendingin setelah memasang atau memperbaiki penyejuk udara. Kelalaian mematuhi hal ini dapat menimbulkan kegagalan produk. • Pasanglah selang penguras dengan baik agar pengurasan air kondensasi dapat berlangsung lancar. Kelalaian mematuhi hal ini dapat menimbulkan kegagalan produk. •...
  • Page 26 DAFTAR ISI DAFTAR ISI KIAT MENGHEMAT FUNGSI TINGKAT ENERGI LANJUT Mengubah suhu ruangan dengan cepat INSTRUKSI Kecerahan layar tampilan KESELAMATAN PENTING °C / °F Konversi Pemurnian udara dalam ruangan Operasi Auto Clean (Pembersihan Otomatis) SEBELUM Mode Perawatan Kulit MENGGUNAKAN Pengoperasian Pemurnian Plasma Komponen Pengoperasian otomatis Penggunaan remote control...
  • Page 27 SEBELUM MENGGUNAKAN SEBELUM MENGGUNAKAN Filter plasma Komponen Masukan udara Filter proteksi ganda Unit dalam ruangan Tombol ON/OFF Gril depan Lampu pengoperasian Filter 3M mirco proteksi Penerima Sinyal Pengubah Ion Plasma Keluaran udara Baling-baling horizontal Bingkai bukaan (louver) vertikal * Fitur ini bisa berubah menurut tipe model. CATATAN Jumlah lampu pengoperasian dan lokasinya dapat bervariasi, tergantung model penyejuk udara.
  • Page 28 SEBELUM MENGGUNAKAN Penggunaan remote control Anda dapat mengoperasikan penyejuk udara lebi h nyaman dengan remote control. Anda dapat menemukan tombol fungsi tambahan di balik pe nutup remote control. Panel Layar Deskripsi kontrol tampilan Tombol Plasma*: Memurnikan udara dengan menghilangkan partikel yang memasuki unit dalam ruangan.
  • Page 29 SEBELUM MENGGUNAKAN Memasukkan baterai 2. Pasang dudukan dengan mengencangkan 2 sekrup dengan erat menggunakan obeng. Masukkan baterai sebelum menggunakan remote control. Tipe baterai yang digunakan adalah AAA (1,5 V) . 1. Lepaskan penutup baterai. 3. Geser masuk remote control ke dalam dudukannya.
  • Page 30 FUNGSI DASAR FUNGSI DASAR Mendinginkan ruangan Anda Menganginkan ruangan Anda (Operasi pendinginan) (Operasi Sirkulasi Udara) Mode ini hanya menyirkulasikan udara dalam 1. Tekan untuk menyalakan daya. ruangan tanpa mengubah suhu ruangan. 2. Tekan berulang-ulang untuk me milih Lampu pendinginan menyala dalam mode operasi pendinginan.
  • Page 31 FUNGSI DASAR Menyesuaikan arah aliran Menyalakan penyejuk udara secara udara otomatis pada waktu tertentu 1. Tekan 1. Untuk menyesuaikan arah aliran secara – Ikon di bawah ini berkedip di bawah layar vertikal, tekan untuk mengubah arah tampilan. aliran udara secara otomatis. 2.
  • Page 32 FUNGSI TINGKAT LANJUT FUNGSI TINGKAT LANJUT Membatalkan pengaturan timer Tekan Penyejuk udara ini menawarkan beberapa – Untuk membatalkan seluruh pengaturan fungsi tambahan tingkat lanjut. timer, tekan Mengubah suhu ruangan Mengatur mode tidur dengan cepat Gunakan mode tidur untuk mematikan (Jet Cool) penyejuk udara secara otomatis saat Anda tidur.
  • Page 33 Gunakan fungsi auto cleaning Pengoperasian Pemurnian (pembersihan otomatis) untuk menghilangkan uap air tersebut. Plasma 1. Tekan Filter plasma yang dikembangkan oleh LG menghilangkan kontaminan renik dari udara – ditampilkan di layar tampilan. asupan secara tuntas untuk menyuplai udara yang bersih dan segar.
  • Page 34 FUNGSI TINGKAT LANJUT Indoor display engoperasian otomatis (Opsional) (Kecerdasan buatan) Model pendinginan saja Dalam mode ini, kecepatan kipas dan suhu disesuaikan secara otomatis, berdasarkan suhu ruangan. Tekan sekali lagi untuk memilih 1. Tekan untuk menyalakan daya. ‘Pilihan Watt (Watt Option) LL’. Huruf ‘LL’ akan tampil pada layar remote.
  • Page 35 FUNGSI TINGKAT LANJUT Mengoperasikan penyejuk Menonaktifkan penyalaan ulang otomatis udara tanpa remote control 1. Buka gril depan. Anda dapat menggunakan tombol On/Off – Angkat sedikit kedua sisi penutup. unit dalam ruangan untuk mengoperasikan penyejuk udara bila remote control tidak tersedia. Namun, kecepatan kipas diatur ke tinggi.
  • Page 36 PERAWATAN PERAWATAN Bersihkan produk secara teratur untuk memper tahankan kinerja yang optimal dan mencegah kemungkinan kerusakan. * Fungsi ini mungkin tidak didukung, tergantung model. Filter plasma Filter proteksi ganda Filter 3M mirco proteksi * Fitur ini bisa berubah menurut tipe model. Item Cleaning method Interval pembersihan...
  • Page 37 PERAWATAN Member Membe ganda mirco proteksi Bersihkan lter 3M micro proteksi setiap sekali ataulebih sering jika perlu. bulan dan ganti lter setiap 6 bulan. 1. Matikan daya dan cabut steker kabel 1. Matikan daya dan cabut steker kabel daya. daya. 2.
  • Page 38 PEMECAHAN MASALAH PEMECAHAN MASALAH Fungsi diagnosis mandiri Produk ini memiliki fungsi diagnosis mandiri yang sudah terpasang. Jika terjadi kesalahan, lampu unit dalam ruangan akan berkedip dalam selang 2 detik. Jika terjadi, hubungi pusat servis atau dealer setempat. Sebelum menelepon petugas servis Periksalah hal berikut sebelum Anda menghubungi pusat servis.
  • Page 39 PEMECAHAN MASALAH Kemungkinan Masalah Tindakan koreksi penyebab Udara tidak Pastikan tidak ada gorden, kerai, atau tersirkulasi dengan perabotan yang menghambat bagian depan benar. penyejuk udara. lter proteksi ganda Filter proteksi ganda lter proteksi- kotor. ganda” untuk informasi lebih lanjut. Di musim panas, perlu waktu untuk mendinginkan udara di dalam ruangan.
  • Page 40 PT. LG ELECTRONICS INDONESIA Kawasan Industri MM2100 Blok G Cikarang Barat, Bekasi, Jawa Barat 17520 INDONESIA...

This manual is also suitable for:

Skincare hybrid s10dlmv

Table of Contents